prikaz prve stranice dokumenta ABS sustav kočenja za bicikl
  Download
PDF 3.1 MB
undergraduate thesis
ABS sustav kočenja za bicikl
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2024. urn:nbn:hr:200:816913
Valenčak, Marin
Josip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
Department of Computer Engineering and Automation
Chair of Computer Engineering

Institutional repository: Faculty of Electrical Engineering, Computer Science and Information Technology Osijek

Cite this document

Valenčak, M. (2024). ABS sustav kočenja za bicikl (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:200:816913

Valenčak, Marin. "ABS sustav kočenja za bicikl." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2024. https://urn.nsk.hr/urn:nbn:hr:200:816913

Valenčak, Marin. "ABS sustav kočenja za bicikl." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2024. https://urn.nsk.hr/urn:nbn:hr:200:816913

Valenčak, M. (2024). 'ABS sustav kočenja za bicikl', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, accessed 23 November 2024, https://urn.nsk.hr/urn:nbn:hr:200:816913

Valenčak M. ABS sustav kočenja za bicikl [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek; 2024 [cited 2024 November 23] Available at: https://urn.nsk.hr/urn:nbn:hr:200:816913

M. Valenčak, "ABS sustav kočenja za bicikl", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Osijek, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:200:816913

Metadata
TitleABS sustav kočenja za bicikl
Title (english)ABS system for bicycles
AuthorMarin Valenčak
MentorTomislav Keser (mentor)
MentorDamir Blažević (sumentor)
Committee memberTomislav Keser (predsjednik povjerenstva)
Committee memberAlfonzo Baumgartner (član povjerenstva)
Committee memberTomislav Galba (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
(Department of Computer Engineering and Automation)
(Chair of Computer Engineering)
Osijek
Defense date and country2024-09-30, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Computing
Process Computing
Abstract
Podjela na segmente kao što su planiranje i istraživanje sve do izrade konstrukcije ABS-a je prikazano. Cijeli proces izrade od samog planiranja sklopovskog rješenja koje se je razvijalo kako su se dodavale nove komponente. Sklopovsko rješenje je u suštini ostalo nepromijenjeno. Konstrukcija je usko vezana uz njega te se nije mogla započeti dok se prvi prototip nije napravio. Taj prototip je pokazao greške i moguća unaprjeđenja koja se mogu napraviti kako bi krajnje rješenje bolje funkcioniralo. Ta unaprjeđenja se vide u urednosti i preciznosti tijekom lemljenja, promjenom licnastih žica u one punog presjeka i promjena senzora kako bi se pojednostavio program. Završni korak je testiranje koje je pokazalo predviđene rezultate. Bicikl je bolje funkcionirao s ABS-om na klizavim površinama dok je na suhoj podlozi kao asfalt produlji put kočenja.
Abstract (english)
The division into segments such as planning and research up to the creation of ABS structure is shown. The entire production process, from the very planning of the circuit simulation, which was developed as new components were added. The assembly solution is essentially unchanged. The construction is closely related to it and could not be started until the first prototype was made. That prototype showed bugs and possible improvements that could be made to make the final solution work better. These improvements can be seen in the neatness and precision during soldering, changing the individual wires to those of the full section, and changing the sensors to simplify the program. The final step is the testing that shows the predicted results. The bike worked better with ABS on slippery surfaces, while on dry surfaces like asphalt, the braking distance was longer.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:200:816913
Study programmeTitle: Professional study programme of Electrical Engineering; specializations in: Power Engineering, Automation, Informatics
Course: Automation
Study programme type: professional
Study level: undergraduate
Academic / professional title: prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike (prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-10-14 11:57:47