prikaz prve stranice dokumenta Analiza strujanja kroz difuzor vodne turbine
  Download
PDF 2.81 MB
undergraduate thesis
Analiza strujanja kroz difuzor vodne turbine
Rijeka: University of Rijeka, Faculty of Engineering, 2022. urn:nbn:hr:190:281426
Cindrić, Ivan
University of Rijeka
Faculty of Engineering

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Cindrić, I. (2022). Analiza strujanja kroz difuzor vodne turbine (Undergraduate thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:281426

Cindrić, Ivan. "Analiza strujanja kroz difuzor vodne turbine." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:190:281426

Cindrić, Ivan. "Analiza strujanja kroz difuzor vodne turbine." Undergraduate thesis, University of Rijeka, Faculty of Engineering, 2022. https://urn.nsk.hr/urn:nbn:hr:190:281426

Cindrić, I. (2022). 'Analiza strujanja kroz difuzor vodne turbine', Undergraduate thesis, University of Rijeka, Faculty of Engineering, accessed 31 August 2024, https://urn.nsk.hr/urn:nbn:hr:190:281426

Cindrić I. Analiza strujanja kroz difuzor vodne turbine [Undergraduate thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2022 [cited 2024 August 31] Available at: https://urn.nsk.hr/urn:nbn:hr:190:281426

I. Cindrić, "Analiza strujanja kroz difuzor vodne turbine", Undergraduate thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:190:281426

Metadata
TitleAnaliza strujanja kroz difuzor vodne turbine
Title (english)Analysis of flow through a water turbine diffuser
AuthorIvan Cindrić
MentorZoran Čarija (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
Rijeka
Defense date and country2022-07-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ovim radom prikazana je izrada simulacije strujanja fluida prema zadanoj geometriji difuzora. Korak po korak su objašnjeni postupci od učitavanja geometrije, kreiranja numeričke mreže, unos parametara i uvjeta te sama simulacija tlakove i brzina fluida kroz difuzor. Za izradu simulacije korišten je program ANSYS pomoću kojeg je izrađena stacionarna simulacija turbulentnog strujanja. Vizualizacijom tlakova i brzina kroz difuzor dobiven je detaljniji uvid u način rada predložene geometrije difuzora. Na temelju dobivenih rezultata moguće je ciljano provesti daljnja poboljšanja geometrije.
Abstract (english)
This paper presents the development of a fluid flow simulation according to the given diffuser geometry. The procedures from loading geometry, creating a numerical network, entering parameters and conditions, and the simulation of pressures and fluid velocities through the diffuser are explained step by step. The ANSYS software was used to create a stationary simulation of turbulent flow. By visualizing the pressures and velocities through the diffuser, a more detailed insight into the mode of operation of the proposed diffuser geometry was obtained. Based on the obtained results, it is possible to make further improvements to the geometry.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:281426
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2022-07-12 21:19:38