prikaz prve stranice dokumenta Maketa hidrauličke jedinice
  Download
PDF 3.31 MB
master's thesis
Maketa hidrauličke jedinice
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2017. urn:nbn:hr:200:839144
Zubak, Tomislav
Josip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
Department of Computer Engineering and Automation
Chair of Automation and Robotics

Institutional repository: Faculty of Electrical Engineering, Computer Science and Information Technology Osijek

Cite this document

Zubak, T. (2017). Maketa hidrauličke jedinice (Master's thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:200:839144

Zubak, Tomislav. "Maketa hidrauličke jedinice." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2017. https://urn.nsk.hr/urn:nbn:hr:200:839144

Zubak, Tomislav. "Maketa hidrauličke jedinice." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2017. https://urn.nsk.hr/urn:nbn:hr:200:839144

Zubak, T. (2017). 'Maketa hidrauličke jedinice', Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, accessed 21 May 2024, https://urn.nsk.hr/urn:nbn:hr:200:839144

Zubak T. Maketa hidrauličke jedinice [Master's thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek; 2017 [cited 2024 May 21] Available at: https://urn.nsk.hr/urn:nbn:hr:200:839144

T. Zubak, "Maketa hidrauličke jedinice", Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Osijek, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:200:839144

Metadata
TitleMaketa hidrauličke jedinice
Title (english)Hydraulic unit model
AuthorTomislav Zubak
MentorRobert Cupec (mentor)
Committee memberRobert Cupec (predsjednik povjerenstva)
Committee memberDražen Slišković (član povjerenstva)
Committee memberEmmanuel Karlo Nyarko (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
(Department of Computer Engineering and Automation)
(Chair of Automation and Robotics)
Osijek
Defense date and country2017-10-04, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Automation and Robotics
Abstract
U ovom diplomskom radu izrađena je maketa hidrauličke jedinice koja se sastoji od dva spremnika tekućina opremljenih crpkama, ventilima, senzorima razine i protoka. Ta maketa predstavlja primjer tehničkog procesa nad kojom provodi proces automatizacije. Maketa je upravljana PLC-a Siemens SIMATIC S7 400, a upravljanje i nadzor vrše se pomoću HMI sučelja. Programsko rješenje logike upravljanja i vizualizacije razvijeno je u programskim alatima Siemens STEP 7 i WinCC, te CODESYS. Opisane su komponente od kojih se maketa sastoji kao i princip rada. Opisan je postupak mjerenja protoka i razine tekućine u spremniku pomoću PLC-a, sklop temeljen na Arduino Uno mikroupravljaču koji služi za upravljanje protokom pumpe, te regulacijski krug za regulaciju protoka uz ručno dodan poremećaj. Osim navedenog opisani su i programabilni logični kontroleri i pripadajući IEC standard te komunikacijske mreže korištene u industriji.
Abstract (english)
A hydraulic unit model consisting of two fluid reservoirs equipped with pumps, valves, level and flow sensors is created. This model represents an example of an automatically controlled technical process.. The model is controlled by a Siemens SIMATIC S7 400 PLC, and the control and monitoring are performed using a HMI interface. The program solution for control and visualization was developed in Siemens STEP 7, WinCC and CODESYS. The components of which the model is built are described and their operating principle is explained. The flow and level measurement procedure in the tank is described. The flow and level measurement is implemented using PLC, an Arduino Uno-based microcontroller assembly for pump flow management, and a flow control circuit with a manual disruption option. Furtheremore, the programmable logic controllers, the corresponding IEC standard and communication networks used in the industry are described.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:200:839144
Study programmeTitle: Graduate University Study Programme in Computer Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka računarstva (magistar/magistra inženjer/inženjerka računarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2017-10-19 13:18:23