prikaz prve stranice dokumenta Digitalni sat s automatskim podešavanjem vremena na arduino platformi
  Download
PDF 3.54 MB
undergraduate thesis
Digitalni sat s automatskim podešavanjem vremena na arduino platformi
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2017. urn:nbn:hr:200:942358
Begić, Filip
Josip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
Department of Computer Engineering and Automation
Chair of Computer Engineering

Institutional repository: Faculty of Electrical Engineering, Computer Science and Information Technology Osijek

Cite this document

Begić, F. (2017). Digitalni sat s automatskim podešavanjem vremena na arduino platformi (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:200:942358

Begić, Filip. "Digitalni sat s automatskim podešavanjem vremena na arduino platformi." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2017. https://urn.nsk.hr/urn:nbn:hr:200:942358

Begić, Filip. "Digitalni sat s automatskim podešavanjem vremena na arduino platformi." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2017. https://urn.nsk.hr/urn:nbn:hr:200:942358

Begić, F. (2017). 'Digitalni sat s automatskim podešavanjem vremena na arduino platformi', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, accessed 29 April 2024, https://urn.nsk.hr/urn:nbn:hr:200:942358

Begić F. Digitalni sat s automatskim podešavanjem vremena na arduino platformi [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek; 2017 [cited 2024 April 29] Available at: https://urn.nsk.hr/urn:nbn:hr:200:942358

F. Begić, "Digitalni sat s automatskim podešavanjem vremena na arduino platformi", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Osijek, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:200:942358

Metadata
TitleDigitalni sat s automatskim podešavanjem vremena na arduino platformi
Title (english)Arduino Based Digital Clock With Automatick Time Adjustment
AuthorFilip Begić
MentorTomislav Matić (mentor)
Committee memberTomislav Matić (predsjednik povjerenstva)
Committee memberZdravko Krpić (član povjerenstva)
Committee memberIvan Aleksi (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
(Department of Computer Engineering and Automation)
(Chair of Computer Engineering)
Osijek
Defense date and country2017-09-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Computing
Architecture of Computer Systems
Abstract
Cilj ovog rada bio je projektirati funkcionalni digitalni sat s mogućnošću automatskog podešavanja. Prije svega bilo je potrebno pronaći odgovarajuće sklopovlje te sve povezati preko arduino platforme. Arduino je platforma namijenjena za izgradnju elektroničkih projekata. Za preuzimanje točnog vremena sa satelita korišten je GPS Neo 6M modul. Za pohranjivanje i osvježavanje tog vremena bio je potreban RTC, a odabran je modul DS1307. Podatke je bilo još potrebno prikazati, a to je bilo potrebno napraviti pomoću matričnih pokaznika. Odabran je dvadesetčetverosatni prikaz gdje su po dva matrična pokaznika prikazivala po jedan segment (sat, minuta, sekunda). Na kraju je programski ostvaren i meni zbog lakšeg pristupa opcijama poput odabira zone, ručnog postavljanja i prisilne sinkronizacije. Korištena su četiri tipkala koja su bila dostatna za navigaciju menijem. Nakon što je sve bilo završeno cijeli sklop bilo je potrebno zaštititi. Napravljeno je kućište od pleksiglasa.
Abstract (english)
The goal of this paper was to develop an automatically synchronized watch. Firstly, it was necessary to obtain all the needed hardware and connect it to Arduino. Arduino is a platform with a purpose of building electronical projects. GPS Neo 6M module was used to get the needed time information from satellite. Storing and updating the time from GPS was task of RTC module DS1307. All the data obtained had to be shown on 8x8 matrices. The format used to display the time was 24 hour format and each time segment (hour, minute, second) got 2 matrices. In the end, the menu was created so it could be easier to access different options such as zone choosing, manual time setting and force time synchronization. Cruising through the menu was made possible with only four buttons. After all that was finished, hardware needed to be protected by making a case. The case was made from plexiglass.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:200:942358
Study programmeTitle: Undergraduate University Study Programme in Computer Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka računarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka računarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2017-11-03 16:12:46