prikaz prve stranice dokumenta Ugradbeni računalni sustavi u vertikalnim transpornim sustavima zgradarstva
  Download
PDF 1.31 MB
undergraduate thesis
Ugradbeni računalni sustavi u vertikalnim transpornim sustavima zgradarstva
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2018. urn:nbn:hr:200:017554
Petrovečki, Ivan
Josip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
Department of Computer Engineering and Automation
Chair of Computer Engineering

Institutional repository: Faculty of Electrical Engineering, Computer Science and Information Technology Osijek

Cite this document

Petrovečki, I. (2018). Ugradbeni računalni sustavi u vertikalnim transpornim sustavima zgradarstva (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:200:017554

Petrovečki, Ivan. "Ugradbeni računalni sustavi u vertikalnim transpornim sustavima zgradarstva." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2018. https://urn.nsk.hr/urn:nbn:hr:200:017554

Petrovečki, Ivan. "Ugradbeni računalni sustavi u vertikalnim transpornim sustavima zgradarstva." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2018. https://urn.nsk.hr/urn:nbn:hr:200:017554

Petrovečki, I. (2018). 'Ugradbeni računalni sustavi u vertikalnim transpornim sustavima zgradarstva', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, accessed 08 December 2024, https://urn.nsk.hr/urn:nbn:hr:200:017554

Petrovečki I. Ugradbeni računalni sustavi u vertikalnim transpornim sustavima zgradarstva [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek; 2018 [cited 2024 December 08] Available at: https://urn.nsk.hr/urn:nbn:hr:200:017554

I. Petrovečki, "Ugradbeni računalni sustavi u vertikalnim transpornim sustavima zgradarstva", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Osijek, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:200:017554

Metadata
TitleUgradbeni računalni sustavi u vertikalnim transpornim sustavima zgradarstva
Title (english)Embedded computer systems in buildings vertical transporting system
AuthorIvan Petrovečki
MentorTomislav Keser (mentor)
Committee memberAlfonzo Baumgartner (predsjednik povjerenstva)
Committee memberTomislav Keser (član povjerenstva)
Committee memberTomislav Galba (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
(Department of Computer Engineering and Automation)
(Chair of Computer Engineering)
Osijek
Defense date and country2018-09-21, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Computing
Architecture of Computer Systems
Abstract
Maketa dizala izrađena je prema primjeru dizala koje se nalazi u stambenim zgradama. Za upravljanje radom makete koristio se Arduino MEGA 2560 na kojega su prema osmišljenoj električnoj shemi spojeni ostali elementi. Upravljački algoritam razvijen je u programskom okruženju Arduino IDE. Glavni problemi s kojima se susrelo bili su vezani uz sigurnost kretanja kabine. Prilikom svakog spajanja makete na izvor napajanja, kabina dizala postavi se u prizemlje. Tako se uvijek zna gdje se kabina nalazi. Jedan od nedostataka makete čini senzor mase koji ne radi na predviđen način, stoga nije bilo moguće napraviti zabranu pokretanja kabine, ako je masa u kabini prevelika.
Abstract (english)
Model of the elevator was made in resemblance to the elevators used in buildings. The controlling unit for this model is Arduino MEGA 2560 based on designed electrical scheme other elements are connected to controlling unit. Controlling algorithms are developed in development environment Arduino IDE. The main issues with the model made was secure movement of the cabin. When the model is pluged into the power supply, the cabin is positioned to the ground floor. With this method it is always known where is the elevator booth. The main downside of the model is the force sensor that isn't working properly, which means that it wasn't possible to stop the elevator from moving when the elevator booth is too heavy
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:200:017554
Study programmeTitle: Professional study programme of Electrical Engineering; specializations in: Power Engineering, Automation, Informatics
Course: Informatics
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike (stručni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2018-10-15 12:13:26