Principi rada analognih i digitalnih mjernih instrumenata

Zovak, Ivan

undergraduate thesis

Principi rada analognih i digitalnih mjernih instrumenata

Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2018. urn:nbn:hr:200:911136

Zovak, Ivan

Josip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
Department of Electromechanical Engineering
Chair of Fundamentals of Electrical Engineering and Measurements

Institutional repository: Faculty of Electrical Engineering, Computer Science and Information Technology Osijek

Cite this document

APA 6th Edition

Zovak, I. (2018). Principi rada analognih i digitalnih mjernih instrumenata (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:200:911136

MLA 8th Edition

Zovak, Ivan. "Principi rada analognih i digitalnih mjernih instrumenata." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2018. https://urn.nsk.hr/urn:nbn:hr:200:911136

Chicago 17th Edition

Harvard

Zovak, I. (2018). 'Principi rada analognih i digitalnih mjernih instrumenata', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, accessed 29 April 2024, https://urn.nsk.hr/urn:nbn:hr:200:911136

Vancouver

Zovak I. Principi rada analognih i digitalnih mjernih instrumenata [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek; 2018 [cited 2024 April 29] Available at: https://urn.nsk.hr/urn:nbn:hr:200:911136

IEEE

I. Zovak, "Principi rada analognih i digitalnih mjernih instrumenata", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Osijek, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:200:911136

Cite this item: https://urn.nsk.hr/urn:nbn:hr:200:911136

Metadata

Title	Principi rada analognih i digitalnih mjernih instrumenata
Title (english)	Work principles of analogue and digital measuring instruments
Author	Ivan Zovak
Mentor	Kruno Miličević (mentor)
Committee member	Kruno Miličević (predsjednik povjerenstva)
Committee member	Zdravko Krpić (član povjerenstva)
Granter	Josip Juraj Strossmayer University of Osijek Faculty of Electrical Engineering, Computer Science and Information Technology Osijek (Department of Electromechanical Engineering) (Chair of Fundamentals of Electrical Engineering and Measurements) Osijek
Defense date and country	2018-09-17, Croatia
Scientific / art field, discipline and subdiscipline	TECHNICAL SCIENCES Electrical Engineering Electromechanical Engineering
Abstract	Navedena teorija iz 2. poglavlja u velikoj se mjeri podudara sa izmjerenim rezultatima. U 3. poglavlju prikazana su mjerenja napona signala frekvencije 50 Hz uz promjene valnog oblika (sinusni, trokutasti i pravokutni). Mjereni signal imao je amplitudu 6 V, a dodavala se i DC komponenta od 5 V. U 4. poglavlju na svakom instrumentu prikazana su mjerenja napona uz promjenu frekvencije u rasponu od 1 Hz – 400 kHz za sinusni signal amplitude 6 V bez DC komponente. Na temelju svih izvršenih mjerenja mogu se uvidjeti karakteristike pojedinih vrsta mjernih instrumenata.
Abstract (english)	Stated theory correspond to measured results significantly. In chapter 3 measurements of voltage are shown, where frequency is 50 Hz and waveform has been varied (sinus, triangular and square). Measured signal had an amplitude of 6 V and it was combined with a DC component of 5 V. In chapter 4 measurements of voltage are shown for each instrument, where frequency was changed from 1 Hz – 400 kHz and waveform was a sine function. Measured signal had an amplitude of 6 V and there was no DC component. Based on all carried out measurements characteristics of each kind of instrument can be determined.
Keywords
Keywords (english)
Language	croatian
URN:NBN	urn:nbn:hr:200:911136
Study programme	Title: Undergraduate University Study Programme Study programme type: university Study level: undergraduate Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike)
Type of resource	Text
File origin	Born digital
Access conditions	Open access
Terms of use
Created on	2018-10-23 09:22:57

Search form