prikaz prve stranice dokumenta Programski blok za upravljanje sekvencom
  Download
PDF 1.09 MB
master's thesis
Programski blok za upravljanje sekvencom
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2019. urn:nbn:hr:200:982665
Teni, Matko
Josip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
Department of Computer Engineering and Automation
Chair of Automation and Robotics

Institutional repository: Faculty of Electrical Engineering, Computer Science and Information Technology Osijek

Cite this document

Teni, M. (2019). Programski blok za upravljanje sekvencom (Master's thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:200:982665

Teni, Matko. "Programski blok za upravljanje sekvencom." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2019. https://urn.nsk.hr/urn:nbn:hr:200:982665

Teni, Matko. "Programski blok za upravljanje sekvencom." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2019. https://urn.nsk.hr/urn:nbn:hr:200:982665

Teni, M. (2019). 'Programski blok za upravljanje sekvencom', Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, accessed 21 May 2024, https://urn.nsk.hr/urn:nbn:hr:200:982665

Teni M. Programski blok za upravljanje sekvencom [Master's thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek; 2019 [cited 2024 May 21] Available at: https://urn.nsk.hr/urn:nbn:hr:200:982665

M. Teni, "Programski blok za upravljanje sekvencom", Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Osijek, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:200:982665

Metadata
TitleProgramski blok za upravljanje sekvencom
Title (english)Program block for sequence control
AuthorMatko Teni
MentorRobert Cupec (mentor)
Committee memberRobert Cupec (predsjednik povjerenstva)
Committee memberDražen Slišković (član povjerenstva)
Committee memberEmmanuel Karlo Nyarko (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
(Department of Computer Engineering and Automation)
(Chair of Automation and Robotics)
Osijek
Defense date and country2019-10-30, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Computing
Process Computing
Abstract
U ovom radu je izrađen programski blok za upravljanje sekvencom. Sekvencijalnim upravljanjem izvršnim članovima u procesu zadajemo određeni niz naredbi. Procesi se moraju pokrenuti i zaustavljati sa prethodno precizno definiranim sekvencama akcija. Sekvencijalno upravljanje procesima se uglavnom vrši pomoću PLC-ova. Programski blok razvijen u ovom radu podržava sekvence od najviše 8 koraka.. Broj koraka definiran je kao jedan od ulaza u programski blok. Početak rada sekvence upravljan je signalima iz polja kao i samo izvođenje koraka sekvence. Korak sekvence može se nalaziti u tri stanja: aktivno stanje, kada je izlaz koraka aktivan; obustavljeno stanje, kada je izlaz koraka neaktivan i sekvenca nije u prekidu; u prekidu, kada je izlaz koraka neaktivan i sekvenca je u prekidu. Izlazi programskog bloka su signalizacija broja trenutno aktivnog koraka, postavljanje vrijednosti za svaki korak i status sekvence. Programska rješenja izrađena su u SIMATIC Step 7 i CODESYS programskim alatima, a vizualizacija je izrađena u SIMATIC WinCC i CODESYS programskim alatima.
Abstract (english)
In this thesis, a program block for sequence control was developed. In sequential control we specify a series of commands for process actuators.A process must be started and stopped with a predefined sequence of actions. Sequential control is mostly implemented using the PLC. The program block developed in this work supports sequences consisting of at most 8 steps. The number of steps is defined as an input into the program block. The sequence start as well as execution of the sequence steps is controlled by field signals. There are 3 possible states of sequence steps: active state, where the step output is active; paused state, where the step output isn't active and the sequence isn't in the abort state;the abort state, where the step output isn't active and the sequence is in the abort state.The program block outputs are the number of the current active step, the status of each step and the status of the sequence. The software solutions were created in SIMATIC Step 7 and CODESYS software tools, and visualization was created in SIMATIC WinCC and CODESYS software tools.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:200:982665
Study programmeTitle: Graduate University Study Programme in Computer Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka računarstva (magistar/magistra inženjer/inženjerka računarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-12-11 13:39:59