Sekvenca za rukovanje koturovima na proizvodnoj liniji

Zlatarević, Stjepan

undergraduate thesis

Sekvenca za rukovanje koturovima na proizvodnoj liniji

Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2020. urn:nbn:hr:200:129671

Zlatarević, Stjepan

Josip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
Department of Computer Engineering and Automation
Chair of Automation and Robotics

Institutional repository: Faculty of Electrical Engineering, Computer Science and Information Technology Osijek

Cite this document

APA 6th Edition

Zlatarević, S. (2020). Sekvenca za rukovanje koturovima na proizvodnoj liniji (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:200:129671

MLA 8th Edition

Zlatarević, Stjepan. "Sekvenca za rukovanje koturovima na proizvodnoj liniji." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2020. https://urn.nsk.hr/urn:nbn:hr:200:129671

Chicago 17th Edition

Harvard

Zlatarević, S. (2020). 'Sekvenca za rukovanje koturovima na proizvodnoj liniji', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, accessed 13 May 2024, https://urn.nsk.hr/urn:nbn:hr:200:129671

Vancouver

Zlatarević S. Sekvenca za rukovanje koturovima na proizvodnoj liniji [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek; 2020 [cited 2024 May 13] Available at: https://urn.nsk.hr/urn:nbn:hr:200:129671

IEEE

S. Zlatarević, "Sekvenca za rukovanje koturovima na proizvodnoj liniji", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Osijek, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:200:129671

Cite this item: https://urn.nsk.hr/urn:nbn:hr:200:129671

Metadata

Title	Sekvenca za rukovanje koturovima na proizvodnoj liniji
Title (english)	Coil handling sequence in production line
Author	Stjepan Zlatarević
Mentor	Dražen Slišković (mentor)
Committee member	Dražen Slišković (predsjednik povjerenstva)
Committee member	Tomislav Keser (član povjerenstva)
Committee member	Ratko Grbić (član povjerenstva)
Granter	Josip Juraj Strossmayer University of Osijek Faculty of Electrical Engineering, Computer Science and Information Technology Osijek (Department of Computer Engineering and Automation) (Chair of Automation and Robotics) Osijek
Defense date and country	2020-01-07, Croatia
Scientific / art field, discipline and subdiscipline	TECHNICAL SCIENCES Basic Technical Sciences Automatics
Abstract	Sekvenca za rukovanje koturovima na proizvodnoj liniji je softver koji se sastoji od tri sekvence: transportne sekvence, sekvence za sortiranje te sekvence za povratak tranportnih kolica u početni položaj. Transportna sekvenca i sekvenca za sortiranje imaju interakciju s namotima, dok sekvenca za povratak transportnih kolica u početni položaj nema. Transportna kolica mogu raditi u dva načina: ručnom i automatskom. U ručnom načinu rada operater može po želji pomjerati kolica u četiri smjera: naprijed, natrag, gore i dolje. Softver nije testiran na stvarnom postrojenju, nego je testiran simuliranjem snzora i preduvjeta. Sve su promjene vidljive na HMI-u (Human machine interface). Softver, tijekom faze testiranja, pokazuje vrlo dobre rezultate, te se može primijeniti na stvarni proces uz blage preinake unutar softverske logike. Softver ima niz zaštita koje bi omogućile siguran rad operaterima unutar postrojenja.
Abstract (english)	Coil handling sequence is software made from three sequences: transport sequence, shifting sequence and sequence for returning transport car in starting position. Transport sequence and shifting sequence have direct interaction with coil, while sequence for returning transport car in starting position does not have. Transport car can operate in two modes: manual and automatic. In manual mode, the operator can move transport car in four directions: forward, backward, up and down. The software was not tested in real plant, but it was tested by simulation of sensors and permissives (precondition). Changes are visible with the use of HMI (Human machine interface). Software, during the test phase, shows very good results and it can be applied in a real plant with slight modifications of software logic. The software has series of protection that enable safe work for operator in the plant.
Keywords
Keywords (english)
Language	croatian
URN:NBN	urn:nbn:hr:200:129671
Study programme	Title: Professional study programme of Electrical Engineering; specializations in: Power Engineering, Automation, Informatics Course: Automation Study programme type: professional Study level: undergraduate Academic / professional title: stručni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike (stručni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike)
Type of resource	Text
File origin	Born digital
Access conditions	Open access
Terms of use
Created on	2020-01-16 12:09:35

Search form