prikaz prve stranice dokumenta Izrada makete za upravljanje koračnim motorom
  Download
PDF 1.06 MB
undergraduate thesis
Izrada makete za upravljanje koračnim motorom
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2019. urn:nbn:hr:200:864251
Jurišić, Ivan
Josip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
Department of Electromechanical Engineering
Chair of Electric Machines and Power Electronics

Institutional repository: Faculty of Electrical Engineering, Computer Science and Information Technology Osijek

Cite this document

Jurišić, I. (2019). Izrada makete za upravljanje koračnim motorom (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:200:864251

Jurišić, Ivan. "Izrada makete za upravljanje koračnim motorom." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2019. https://urn.nsk.hr/urn:nbn:hr:200:864251

Jurišić, Ivan. "Izrada makete za upravljanje koračnim motorom." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2019. https://urn.nsk.hr/urn:nbn:hr:200:864251

Jurišić, I. (2019). 'Izrada makete za upravljanje koračnim motorom', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, accessed 15 November 2024, https://urn.nsk.hr/urn:nbn:hr:200:864251

Jurišić I. Izrada makete za upravljanje koračnim motorom [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek; 2019 [cited 2024 November 15] Available at: https://urn.nsk.hr/urn:nbn:hr:200:864251

I. Jurišić, "Izrada makete za upravljanje koračnim motorom", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Osijek, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:200:864251

Metadata
TitleIzrada makete za upravljanje koračnim motorom
Title (english)Creating a step motor controler
AuthorIvan Jurišić
MentorŽeljko Špoljarić (mentor)
Committee memberŽeljko Špoljarić (predsjednik povjerenstva)
Committee memberVenco Ćorluka (član povjerenstva)
Committee memberKrešimir Miklošević (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
(Department of Electromechanical Engineering)
(Chair of Electric Machines and Power Electronics)
Osijek
Defense date and country2019-10-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Electromechanical Engineering
Abstract
Zadatak ovoga rada je napraviti maketu za upravljanje koračnim motorom. Osovina koračnog motora se okreće za punu revoluciju ili samo za korak, u oba smjera, ovisno o tome koje tipkalo je pritisnuto. Za izradu makete korištena je pločica MEGA2560, L298N motor driver, Nema 17 koračni motor, eksperimentalna pločica na koju su spajana tipkala, otpornici i žice za spajanje. Za napajanje makete se koristi baterija od 9V. Programski kôd napisan je u besplatnoj arduinovoj programskoj podršci, u jeziku vrlo sličnom C-u. Pisanje kôd-a je olakšala činjenica da arduinova programska podrška sadrži predučitanu biblioteku koja se koristi upravo za upravljanje koračnim motorima.
Abstract (english)
The task of this paper is to create a model for stepper motor control. The stepper motor shaft rotates for full revolution, or just for a step, in either direction, depending on which push button is pressed. To create the model, MEGA 2560, L298N motor driver, Nema17 stepper motor, solderless breadboard on which push buttons were connected, resistors and connectors were used. A 9V battery is used to power the model. The program code is written in free arduino software, in a language very similar to C. Code writing was facilitated by the fact that the arduino software contained a prerequisite library used precisely to manage stepper motors.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:200:864251
Study programmeTitle: Professional study programme of Electrical Engineering; specializations in: Power Engineering, Automation, Informatics
Course: Automation
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike (stručni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-02-11 11:57:03