prikaz prve stranice dokumenta Modeliranje, simuliranje i određivanje parametara strojeva korištenjem programskog paketa ANSYS
  Download
PDF 12.85 MB
master's thesis
Modeliranje, simuliranje i određivanje parametara strojeva korištenjem programskog paketa ANSYS
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2021. urn:nbn:hr:200:738631
Čvek, Kristijan
Josip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
Department of Electromechanical Engineering
Chair of Electric Machines and Power Electronics

Institutional repository: Faculty of Electrical Engineering, Computer Science and Information Technology Osijek

Cite this document

Čvek, K. (2021). Modeliranje, simuliranje i određivanje parametara strojeva korištenjem programskog paketa ANSYS (Master's thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:200:738631

Čvek, Kristijan. "Modeliranje, simuliranje i određivanje parametara strojeva korištenjem programskog paketa ANSYS." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2021. https://urn.nsk.hr/urn:nbn:hr:200:738631

Čvek, Kristijan. "Modeliranje, simuliranje i određivanje parametara strojeva korištenjem programskog paketa ANSYS." Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2021. https://urn.nsk.hr/urn:nbn:hr:200:738631

Čvek, K. (2021). 'Modeliranje, simuliranje i određivanje parametara strojeva korištenjem programskog paketa ANSYS', Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, accessed 12 January 2025, https://urn.nsk.hr/urn:nbn:hr:200:738631

Čvek K. Modeliranje, simuliranje i određivanje parametara strojeva korištenjem programskog paketa ANSYS [Master's thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek; 2021 [cited 2025 January 12] Available at: https://urn.nsk.hr/urn:nbn:hr:200:738631

K. Čvek, "Modeliranje, simuliranje i određivanje parametara strojeva korištenjem programskog paketa ANSYS", Master's thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Osijek, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:200:738631

Metadata
TitleModeliranje, simuliranje i određivanje parametara strojeva korištenjem programskog paketa ANSYS
Title (english)Modelling, simulation and determination of machine parameters using the ANSYS software package
AuthorKristijan Čvek
MentorTomislav Barić (mentor)
Committee memberTomislav Barić (predsjednik povjerenstva)
Committee memberMarinko Barukčić (član povjerenstva)
Committee memberVedrana Jerković Štil (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
(Department of Electromechanical Engineering)
(Chair of Electric Machines and Power Electronics)
Osijek
Defense date and country2021-09-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Power Engineering
Abstract
Magnetski krug T-sheme transformatora, struktura i vrste namota transformatora, teorija rada transformatora, iznesene su vrste modela transformatora specifično T-shema transformatora zasnovana na teoriji strujnih krugova, detaljno su opisane tehnike odreĎivanja parametara transformatora zasnovane na teoriji magnetskih krugova te teoriji polja i valova. Dobiveni rezultati analize su prokomentirani i usporeĎeni s stvarnim podacima . Analiza transformatora je zasnovana na teoriji polja i valova i provedena je simulacijom u programskom paketu ANSYS metodom konačnih elemenata (MKE) rješava elektromagnetske zadaće zasnovane na teoriji polja i valova. Za analizu se upotrebljava programski paket ANSYS koji svoj rad zasniva na teoriji polja i valova zbog svoje visoke točnosti pri inţenjerskim analizama i numeričkim proračunima. Upotreba i koraci rješavanja analize pomoću programskog paketa ANSYS su priloţeni te detaljno komentirani u prilogu. Rezultati analize u programskom paketu ANSYS prokomentirani su i grafički prikazani. Provedena je usporedba zadanih i dobivenih vrijednosti, a rezultati su prokomentirani. Izvršen je numerički proračun parametara T-sheme transformatora (glavni i rasipni induktivitet) dvjema tehnikama analitičkog računanja te simulacijom. U prilogu su priloţeni svi koraci simulacije i modeliranje modela dvije vrste transformatora u programskom paketu ANSYS radi dokaza autentičnosti rada i simulacije.
Abstract (english)
Magnetic circuit of T-scheme transformer, structure and types of transformer windings, the theory of transformer operation, the types of transformer models are presented, specifically the T-scheme of transformer based on theory of circuit, techniques for determining the parameters of transformers based on the theory of magnetic circuits and the theory of fields and waves are described in details. The obtained analysis results were commented and compared with the actual data. The analysis of transformers is based on the theory of fields and waves and was performed by simulation in the software package ANSYS by finite element method (FEM) solves electromagnetic problems based on the theory and waves. The ANSYS software package is used for the analysis which bases it's work on field and wave theory due to it's high accuracy in engineering analyzes and numerical calculations. The use and steps of solving the analysis using the ANSYS software package are enclosed and commented in detail in the attachment. The results of the analysis in the ANSYS software package are commented and graphically presented. A comparison of setpoints and obtained values was performed, and the results were commented. Numerical calculation of transformer T-scheme parameters (main and leakage inductance) was performed by two analyrical numerical techiques and simulation. Attached are all the steps of simulations and modeling of models of two types of transformers in the software package ANSYS for proof of authenticity of this work and simulation.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:200:738631
Study programmeTitle: Graduate University Study Programme in Electrical Engineering; specializations in: Communications and Informatics, Power Engineering
Course: Power Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka elektrotehnike (magistar/magistra inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2021-10-05 13:35:41