Upravljanje pomoću Mitsubishi FX5UC programabilnog logičkog kontrolera

Žugec, Antonio

undergraduate thesis

Upravljanje pomoću Mitsubishi FX5UC programabilnog logičkog kontrolera

Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2022. urn:nbn:hr:200:450149

Žugec, Antonio

Josip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
Department of Computer Engineering and Automation
Chair of Automation and Robotics

Institutional repository: Faculty of Electrical Engineering, Computer Science and Information Technology Osijek

Cite this document

APA 6th Edition

Žugec, A. (2022). Upravljanje pomoću Mitsubishi FX5UC programabilnog logičkog kontrolera (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:200:450149

MLA 8th Edition

Žugec, Antonio. "Upravljanje pomoću Mitsubishi FX5UC programabilnog logičkog kontrolera." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2022. https://urn.nsk.hr/urn:nbn:hr:200:450149

Chicago 17th Edition

Harvard

Žugec, A. (2022). 'Upravljanje pomoću Mitsubishi FX5UC programabilnog logičkog kontrolera', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:200:450149

Vancouver

Žugec A. Upravljanje pomoću Mitsubishi FX5UC programabilnog logičkog kontrolera [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek; 2022 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:200:450149

IEEE

A. Žugec, "Upravljanje pomoću Mitsubishi FX5UC programabilnog logičkog kontrolera", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Osijek, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:200:450149

Cite this item: https://urn.nsk.hr/urn:nbn:hr:200:450149

Metadata

Title	Upravljanje pomoću Mitsubishi FX5UC programabilnog logičkog kontrolera
Title (english)	Control using Mitsubishi FX5UC programmable logic controller
Author	Antonio Žugec
Mentor	Ratko Grbić (mentor)
Committee member	Ratko Grbić (predsjednik povjerenstva)
Committee member	Goran Knežević (član povjerenstva)
Committee member	Dražen Slišković (član povjerenstva)
Granter	Josip Juraj Strossmayer University of Osijek Faculty of Electrical Engineering, Computer Science and Information Technology Osijek (Department of Computer Engineering and Automation) (Chair of Automation and Robotics) Osijek
Defense date and country	2022-08-29, Croatia
Scientific / art field, discipline and subdiscipline	TECHNICAL SCIENCES Basic Technical Sciences Automatics
Abstract	Cilj rada je bio opisati od kojih dijelova se sastoji korištena maketa koja sadrži programabilni logički kontroler Mitsubishi FX5UC i pripadne module. Nakon što su opisani svi dijelovi PLC-a potrebno je bilo objasniti različite načine upravljanja sustavom te implementirati algoritme za upravljanje PLC-om. Prikazano je kako se uz pomoć PLC-a mogu automatizirati procesi. Na kraju rada se demonstrirao rad PLC-a kroz konkretne primjere pomoću pokusa za regulaciju temperature u komori, upravljanje brzinom vrtnje asinkronog motora i upravljanje servomotorom.
Abstract (english)	The aim of the paper was to describe all the parts the used model consists of, which contains a programmable logic controller Mitsubishi FX5UC and associated modules. After all parts of the PLC were described, it was necessary to explain the different ways of managing the system and to implement algorithms for PLC management. It is shown how processes can be automated with the help of a PLC. At the end of paper, the operation of the PLC was demonstrated through concrete examples using experiments for chamber temperature control, asynchronous motor speed control and servomotor control.
Keywords
Keywords (english)
Language	croatian
URN:NBN	urn:nbn:hr:200:450149
Study programme	Title: Undergraduate University Study Programme in Computer Engineering Study programme type: university Study level: undergraduate Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka računarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka računarstva)
Type of resource	Text
File origin	Born digital
Access conditions	Open access
Terms of use
Created on	2022-09-07 12:56:20

Search form