prikaz prve stranice dokumenta CMOS diferencijalno pojačalo
  Download
PDF 148.81 KB
undergraduate thesis
CMOS diferencijalno pojačalo
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2015. urn:nbn:hr:200:749593
Lupić, Božidar
Josip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
Department of Communications
Chair of Electronics and Microelectronics

Institutional repository: Faculty of Electrical Engineering, Computer Science and Information Technology Osijek

Cite this document

Lupić, B. (2015). CMOS diferencijalno pojačalo (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:200:749593

Lupić, Božidar. "CMOS diferencijalno pojačalo." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2015. https://urn.nsk.hr/urn:nbn:hr:200:749593

Lupić, Božidar. "CMOS diferencijalno pojačalo." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2015. https://urn.nsk.hr/urn:nbn:hr:200:749593

Lupić, B. (2015). 'CMOS diferencijalno pojačalo', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, accessed 18 February 2025, https://urn.nsk.hr/urn:nbn:hr:200:749593

Lupić B. CMOS diferencijalno pojačalo [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek; 2015 [cited 2025 February 18] Available at: https://urn.nsk.hr/urn:nbn:hr:200:749593

B. Lupić, "CMOS diferencijalno pojačalo", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Osijek, 2015. Available at: https://urn.nsk.hr/urn:nbn:hr:200:749593

Metadata
TitleCMOS diferencijalno pojačalo
Title (english)CMOS differential amplifier
AuthorBožidar Lupić
MentorDavor Vinko (mentor)
Committee memberDavor Vinko (predsjednik povjerenstva)
Committee memberHrvoje Glavaš (član povjerenstva)
Committee memberMarijan Herceg (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
(Department of Communications)
(Chair of Electronics and Microelectronics)
Osijek
Defense date and country2015-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Computing
Information Systems
Abstract
Rad sadrži opis CMOS tranzistora i izradu diferencijalnoga pojačala kao modela, pomoću sklopova u simulaciji, te mjerenja. Cijeli rad se sastoji od tri dijela: teorije, praktičnog dijela i zrade sklopa i simulacije. Teorija je dio koji opisuje način rada CMOS tranzistora i način na koji radi diferencijalno pojačalo. Također, opisani su i dijelovi diferencijalnog pojačala i koje su njegove osnovne karakteristike. Praktični dio izrade sklopa jest izrada diferencijalnog pojačala uz pomoć integriranih sklopova HCF4007UB i mjerenje izlaznih karakteristika. Za mjerenja su korištena dva slučaja; kada na izlazu nemamo opterećenje i kada imamo kapacitivno opterećenje. Mjerenja su vršena na način da se odredi do koje frekvencije sklop može raditi i koliki je maksimalni iznos pojačanja. Simulacija pokazuje izradu sheme u programu NI Multisim 14. Na taj način smo usporedili mjerenja realnih tranzistora i približno idealnih tranzistora.
Abstract (english)
The paper is consisted of the CMOS transistor description, differential amplifier production as a model using electronic circuits in the simulation, and all other required measurements. The whole paper is consisted out of three main parts: theory, practical part of the electronic circuit production and the simulation itself. Theory is the part that describes CMOS transistor mode of operation and the operation mode of the differential amplifier. Furthermore, in the theory are also described elements of the differential amplifier and his main characteristics. Practical part of the production of the electronic circuit is the production of the differential amplifier itself by using HCF4007UB integrated circuits and the measurement of the output characteristics. For the measurements are used two instances; when there is no load at the exit and when there is capacitive load. The measurements are performed in a way that we define the electronic circuit's maximum frequency for operating, and the maximum amount of the amplification. The simulation itself shows us the scheme production in the NI Multisim 14 program. In that way we successfully compared the measurements of the real transistors and the approximately ideal transistors.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:200:749593
Study programmeTitle: Undergraduate University Study Programme; branch Electrical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2016-06-23 11:03:37