prikaz prve stranice dokumenta Razvoj 16x16x16 RGB LED kocke s integriranim LCD zaslonom
  Download
PDF 2.46 MB
undergraduate thesis
Razvoj 16x16x16 RGB LED kocke s integriranim LCD zaslonom
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2024. urn:nbn:hr:200:460890
Bušić, Danijel
Josip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
Department of Communications
Chair of Radiocommunications and Telecommunications

Institutional repository: Faculty of Electrical Engineering, Computer Science and Information Technology Osijek

Cite this document

Bušić, D. (2024). Razvoj 16x16x16 RGB LED kocke s integriranim LCD zaslonom (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:200:460890

Bušić, Danijel. "Razvoj 16x16x16 RGB LED kocke s integriranim LCD zaslonom." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2024. https://urn.nsk.hr/urn:nbn:hr:200:460890

Bušić, Danijel. "Razvoj 16x16x16 RGB LED kocke s integriranim LCD zaslonom." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2024. https://urn.nsk.hr/urn:nbn:hr:200:460890

Bušić, D. (2024). 'Razvoj 16x16x16 RGB LED kocke s integriranim LCD zaslonom', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, accessed 27 September 2024, https://urn.nsk.hr/urn:nbn:hr:200:460890

Bušić D. Razvoj 16x16x16 RGB LED kocke s integriranim LCD zaslonom [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek; 2024 [cited 2024 September 27] Available at: https://urn.nsk.hr/urn:nbn:hr:200:460890

D. Bušić, "Razvoj 16x16x16 RGB LED kocke s integriranim LCD zaslonom", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Osijek, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:200:460890

Metadata
TitleRazvoj 16x16x16 RGB LED kocke s integriranim LCD zaslonom
Title (english)Development of 16x16x16 RGB LED cube with integrated LCD screen
AuthorDanijel Bušić
MentorDrago Žagar (mentor)
MentorJosip Spišić (sumentor)
Committee memberDrago Žagar (predsjednik povjerenstva)
Committee memberKrešimir Grgić (član povjerenstva)
Committee memberVišnja Križanović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
(Department of Communications)
(Chair of Radiocommunications and Telecommunications)
Osijek
Defense date and country2024-09-13, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Automation and Robotics
Abstract
ovom završnom radu za dizajniranje postolja korišten je PrusaSlicer, alat za pripremu 3D modela za ispis. Postolje se sastoji od osam modularnih dijelova koji čine stabilan pravokutni okvir s preciznim otvorima za kabel napajanja i LCD zaslon. Središnji dio postolja sadrži četiri napajanja od 5V i 60A, raspoređena radi ravnoteže i ventilacije. Svaki od 16 dijelova okvira uključuje PCB s posebnim dizajnom za LED diode, gdje su pinovi i signali pažljivo raspoređeni za optimalno napajanje i upravljanje. LED diode su montirane u rešetke, koje omogućuju ravnomjerno osvjetljenje. Nakon postavljanja rešetki i lemljenja, PCB-ovi su smješteni u kutije i povezani s napajanjem putem pouzdanih XT60 konektora. Na kraju, specijalizirana PCB pločica s mikrokontrolerom Teensy 4.0 upravlja cijelim sustavom, uključujući LCD zaslon i dodirni ekran. Ova konfiguracija omogućava stabilan i dugotrajan rad sustava s visokim energetskim zahtjevima.
Abstract (english)
For designing the base, PrusaSlicer was used, a tool for preparing 3D models for printing. The base consists of eight modular parts that form a stable rectangular frame with precise openings for the power cable and LCD screen. The central part of the base houses four power supplies of 5V and 60A, arranged for balance and ventilation. Each of the 16 frame sections includes a PCB with a specific design for LED diodes, where pins and signals are carefully arranged for optimal power supply and control. The LED diodes are mounted in grids, allowing for even illumination. After positioning the grids and soldering, the PCBs are placed in enclosures and connected to the power supply via reliable XT60 connectors. Finally, a specialized PCB with a Teensy 4.0 microcontroller manages the entire system, including the LCD screen and touch interface. This setup ensures stable and long-lasting operation of the system with high energy demands.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:200:460890
Study programmeTitle: Professional study programme of Electrical Engineering; specializations in: Power Engineering, Automation, Informatics
Course: Power Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike (prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-09-17 07:21:00