prikaz prve stranice dokumenta Dogradnja postrojenja mjernim članom razine tekućine
  Download
PDF 148.57 KB
undergraduate thesis
Dogradnja postrojenja mjernim članom razine tekućine
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2014. urn:nbn:hr:200:675877
Pervan, Zvonimir
Josip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
Department of Computer Engineering and Automation
Chair of Automation and Robotics

Institutional repository: Faculty of Electrical Engineering, Computer Science and Information Technology Osijek

Cite this document

Pervan, Z. (2014). Dogradnja postrojenja mjernim članom razine tekućine (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:200:675877

Pervan, Zvonimir. "Dogradnja postrojenja mjernim članom razine tekućine." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2014. https://urn.nsk.hr/urn:nbn:hr:200:675877

Pervan, Zvonimir. "Dogradnja postrojenja mjernim članom razine tekućine." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2014. https://urn.nsk.hr/urn:nbn:hr:200:675877

Pervan, Z. (2014). 'Dogradnja postrojenja mjernim članom razine tekućine', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, accessed 20 May 2024, https://urn.nsk.hr/urn:nbn:hr:200:675877

Pervan Z. Dogradnja postrojenja mjernim članom razine tekućine [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek; 2014 [cited 2024 May 20] Available at: https://urn.nsk.hr/urn:nbn:hr:200:675877

Z. Pervan, "Dogradnja postrojenja mjernim članom razine tekućine", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Osijek, 2014. Available at: https://urn.nsk.hr/urn:nbn:hr:200:675877

Metadata
TitleDogradnja postrojenja mjernim članom razine tekućine
Title (english)Extension of Plant by a Liquid Level Sensor
AuthorZvonimir Pervan
MentorDražen Slišković (mentor)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
(Department of Computer Engineering and Automation)
(Chair of Automation and Robotics)
Osijek
Defense date and country2014-10-10, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Automation and Robotics
Abstract
U ovom radu opisan je postupak dogradnje postrojenja za uskladištenje tekućine sa senzorom koji mjeri razinu tekućine u središnjem spremniku. Opisan je način rada postrojenja i navedeni njegovi nedostaci te je opisano načelo rada korištenog senzora „Temposonics Model R“. Kako bi se povezao senzor sa računalom, odnosno kako bi se nadzirao sustav, korišten je PLC „Siemens CPU 314 IFM“ i analogni modul „SM331“. Da bi se nadzirao sustav, potrebno je isprogramirati način rada pomoću Siemenosvog programskog paketa „STEP 7“. Prije postavljanja senzora u pogon, potrebno je ispitati ispravnost senzora. Nakon utvrđivanja ispravnosti senzora, potrebno je snimiti statičku i dinamičku karakteristiku budući da u tehničkim podacima (datasheet) senzora nisu navedeni. Ugradnjom senzora na postrojenje, potrebno ga je povezati sa PLC-om preko kabela i konektora, te je senzor spreman za puštanje u pogon
Abstract (english)
This paper describes the installation of a magnetostrictive level measurement sensor named “Temposonics Model R” on the top of the middle container of a liquid storage device. First, the sensor’s functionality was tested. The sensor was connected to the PLC “Siemens SIMATIC IFM314” and powered by the 24VDC power supply located on the PLC. After the testing was done, the next step was to capture the static and dynamic characteristics of the sensor. This was carried out using an A/D converter named “PPC Controller Board CLP 1103”. When the capturing was performed, the sensor was mounted on the middle container of the liquid storage device which was then connected to the PLC via a DB37 connector. After mounting and connecting the sensor to the PLC, the sensor was ready to operate
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:200:675877
Study programmeTitle: Professional study programme of Electrical Engineering; Power Engineering, Automation, Informatics
Course: Automation
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike (stručni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2016-07-04 08:30:21