prikaz prve stranice dokumenta Pogon za proizvodnju i obradu kamena
  Download
PDF 3.79 MB
undergraduate thesis
Pogon za proizvodnju i obradu kamena
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2016. urn:nbn:hr:200:204307
Čar, Dino
Josip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
Department of Electromechanical Engineering
Chair of Electric Machines and Power Electronics

Institutional repository: Faculty of Electrical Engineering, Computer Science and Information Technology Osijek

Cite this document

Čar, D. (2016). Pogon za proizvodnju i obradu kamena (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:200:204307

Čar, Dino. "Pogon za proizvodnju i obradu kamena." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2016. https://urn.nsk.hr/urn:nbn:hr:200:204307

Čar, Dino. "Pogon za proizvodnju i obradu kamena." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2016. https://urn.nsk.hr/urn:nbn:hr:200:204307

Čar, D. (2016). 'Pogon za proizvodnju i obradu kamena', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, accessed 23 July 2024, https://urn.nsk.hr/urn:nbn:hr:200:204307

Čar D. Pogon za proizvodnju i obradu kamena [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek; 2016 [cited 2024 July 23] Available at: https://urn.nsk.hr/urn:nbn:hr:200:204307

D. Čar, "Pogon za proizvodnju i obradu kamena", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Osijek, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:200:204307

Metadata
TitlePogon za proizvodnju i obradu kamena
AuthorDino Čar
MentorTomislav Barić (mentor)
Committee memberTomislav Barić (predsjednik povjerenstva)
Committee memberHrvoje Glavaš (član povjerenstva)
Committee memberDenis Pelin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
(Department of Electromechanical Engineering)
(Chair of Electric Machines and Power Electronics)
Osijek
Defense date and country2016-09-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Electromechanical Engineering
Abstract
U završnom radu opisan je proces u kojemu se iz kamenoloma, točnije iz stijenske mase, bilo da je to mramor ili granit, dobiva proizvod željenog oblika, mase i dimenzija. Također je opisano dobivanje primarnih i komercijalnih blokova pomoću dijamantne žične pile, lančane sjekačice i ostalih metoda. U zadnjim koracima procesa se gaterima, filo sajlama, polirkama i frezama dobivaju konačni proizvodi. Brojnim proračunima su pobliže opisane same metode i teorijske osnove procesa obrade kamena. Svaki korišteni stroj u procesu je opisan kao i njegov princip rada, a svaki od njih se temelji na radu trofaznog asinkronog motora.
Abstract (english)
This final paper describes the proces where, from quarry, stone mass precisely, whether it is marble or granite, the product of desired shape, mass and dimensions is got. Getting primary and commercial blocks using diamond wire saw, chain saw and other methods is also described. In the last steps of the process, gang saws, single wire saws, polishing machines and bridge sawing machines are used to make the final product. Using numerous calculations, the methods itself and the basics of stone processing are closely described. Every used machine in the process is described as well as its work principle and every one of them is based on the work of the three-phase induction motor.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:200:204307
Study programmeTitle: Undergraduate University Study Programme
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2016-10-14 11:26:45