prikaz prve stranice dokumenta Dizajn 3D prijemnika u sustavu bežičnog prijenosa energije
  Download
PDF 1.59 MB
undergraduate thesis
Dizajn 3D prijemnika u sustavu bežičnog prijenosa energije
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2016. urn:nbn:hr:200:145385
Vinković, Ivan
Josip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
Department of Communications
Chair of Electronics and Microelectronics

Institutional repository: Faculty of Electrical Engineering, Computer Science and Information Technology Osijek

Cite this document

Vinković, I. (2016). Dizajn 3D prijemnika u sustavu bežičnog prijenosa energije (Undergraduate thesis). Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek. Retrieved from https://urn.nsk.hr/urn:nbn:hr:200:145385

Vinković, Ivan. "Dizajn 3D prijemnika u sustavu bežičnog prijenosa energije." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2016. https://urn.nsk.hr/urn:nbn:hr:200:145385

Vinković, Ivan. "Dizajn 3D prijemnika u sustavu bežičnog prijenosa energije." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, 2016. https://urn.nsk.hr/urn:nbn:hr:200:145385

Vinković, I. (2016). 'Dizajn 3D prijemnika u sustavu bežičnog prijenosa energije', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, accessed 25 August 2024, https://urn.nsk.hr/urn:nbn:hr:200:145385

Vinković I. Dizajn 3D prijemnika u sustavu bežičnog prijenosa energije [Undergraduate thesis]. Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek; 2016 [cited 2024 August 25] Available at: https://urn.nsk.hr/urn:nbn:hr:200:145385

I. Vinković, "Dizajn 3D prijemnika u sustavu bežičnog prijenosa energije", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Osijek, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:200:145385

Metadata
TitleDizajn 3D prijemnika u sustavu bežičnog prijenosa energije
Title (english)3D receiver design for wireless energy transfer
AuthorIvan Vinković
MentorDavor Vinko (mentor)
Committee memberDavor Vinko (predsjednik povjerenstva)
Committee memberHrvoje Glavaš (član povjerenstva)
Committee memberMarijan Herceg (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Faculty of Electrical Engineering, Computer Science and Information Technology Osijek
(Department of Communications)
(Chair of Electronics and Microelectronics)
Osijek
Defense date and country2016-09-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Electronics
Abstract
Cilj ovog rada je dizajnirati 3D prijemnik u sustavu bežičnog prijenosa energije na kojem je potrebno napraviti mjerenja dok je pod utjecajem promjenjivog magnetskog polja. 3D prijemnik radi na principu elektromagnetske indukcije ,a izrađen od bakrene žice raspoređene tako da budu pod pravim kutom u odnosu jedna na drugu dok su ostali elementi prema shemi spojeni na krajeve zavojnica. Mjerenjem se utvrdilo da napon induciran na zavojnicama ovisi o položaju 3D prijemnika u magnetskom polju. Što je zavojnica više okomita na silnice magnetskog polja to se veći napon inducira na njoj. Mjerenja su pokazala da su rezultati u skladu sa očekivanim grafovima i valnim oblicima napona
Abstract (english)
The goal of this paper was to design a 3D reciever in the system of wireless energy transfer on which mesaurements were made while it was under the influence of a alternating magnetic field. The 3D reciever works on the principle of electromagnetic induction, and it is made of cooper wire arranged so that they are positioned under a right angle to each other while the other elements on the schematic are connected to the ends of the coils. The mesaurements determined that the voltage induced in the coils depends on the position od the 3D reciever in the magnetic field. If the coil is more perpendicular to the magnetic field lines the induced voltage is higher. The mesaurements have shown that the results correspond to the expected diagrams and voltage waveforms.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:200:145385
Study programmeTitle: Undergraduate University Study Programme
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2016-11-03 11:47:34