prikaz prve stranice dokumenta Dizajn sinkronog motora s permanentnim magnetima i aksijalnim tokom za pogon električnog bicikla
No public access
master's thesis
Dizajn sinkronog motora s permanentnim magnetima i aksijalnim tokom za pogon električnog bicikla
Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing, 2022. urn:nbn:hr:168:177110
Vulama, Jakov
University of Zagreb
Faculty of Electrical Engineering and Computing

Institutional repository: FER Repository

Cite this document

Vulama, J. (2022). Dizajn sinkronog motora s permanentnim magnetima i aksijalnim tokom za pogon električnog bicikla (Master's thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:177110

Vulama, Jakov. "Dizajn sinkronog motora s permanentnim magnetima i aksijalnim tokom za pogon električnog bicikla." Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2022. https://urn.nsk.hr/urn:nbn:hr:168:177110

Vulama, Jakov. "Dizajn sinkronog motora s permanentnim magnetima i aksijalnim tokom za pogon električnog bicikla." Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2022. https://urn.nsk.hr/urn:nbn:hr:168:177110

Vulama, J. (2022). 'Dizajn sinkronog motora s permanentnim magnetima i aksijalnim tokom za pogon električnog bicikla', Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 29 November 2024, https://urn.nsk.hr/urn:nbn:hr:168:177110

Vulama J. Dizajn sinkronog motora s permanentnim magnetima i aksijalnim tokom za pogon električnog bicikla [Master's thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2022 [cited 2024 November 29] Available at: https://urn.nsk.hr/urn:nbn:hr:168:177110

J. Vulama, "Dizajn sinkronog motora s permanentnim magnetima i aksijalnim tokom za pogon električnog bicikla", Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:168:177110

Metadata
TitleDizajn sinkronog motora s permanentnim magnetima i aksijalnim tokom za pogon električnog bicikla
Title (english)Design of the Axial Flux Permanent Magnet Synchronous Motor for Electrical Bike Drive Application
AuthorJakov Vulama
MentorZlatko Hanić (mentor)
Committee memberZlatko Hanić (predsjednik povjerenstva)
Committee memberDamir Žarko (član povjerenstva)
Committee memberStjepan Stipetić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2022-07-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
U ovom diplomskom radu proveden je analitički izračun i 3D simulacija sinkronog motora s površinskim magnetima (PM, SPM) i aksijalnim tokom za pogon električnog bicikla. Najprije su definirani zahtjevi motora (nazivna snaga i moment, maksimalna snaga i moment, maksimalna brzina, karakteristike namota, Halbach topologija, itd.). Nakon toga je napravljen analitički izračun motora i validacija dizajna motora pomoću 3D metode konačnih elemenata koja je koristila ručno nacrtani model napravljen u programu Fusion 360. Proveden je izračun 9 radnih točaka čiji podatci su obrađeni i korišteni za dobivanje mape korisnosti, karakteristika momenta, snage i gubitaka u stroju. Uspoređene su izračunate karakteristike i parametri motora na temelju podataka dobivenih analitičkim izračunom i onim provedenim u programima Simcenter Magnet i Matlab. Konačno prikazan je izrađen prototip i tehnička dokumentacija koja je korištena za izradu motora.
Abstract (english)
In this master's thesis paper, the calculation of a synchronous motor with surface magnets (PM, SPM) and axial flux for use in an electric bicycle was performed. First, the motor requirements were defined (rated power and torque, maximum power and torque, maximum speed, Halbach topology, etc.). After that we move on to the analytical calculation of the machine characteristics, which was performed in Matlab, and to the validation of the motor design using the 3D finite element method (Symcenter Magnet) which used a hand drawn 3D model made in "Fusion 360". A calculation of 9 operating points was performed, the data of which were processed and used to obtain an efficiency map, torque and power characteristics as well as the individual and total losses in the machine. The calculated characteristics and parameters of the motor obtained by the analytical calculation are compared to the analysis carried out in the 9 operating point simulations performed in the Simcenter Magnet program as well as Matlab. Finally, the prototype and the technical documentation used to make the motor were presented.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:168:177110
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka elektrotehnike i informacijske tehnologije (magistar/magistra inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2023-01-14 22:01:58