prikaz prve stranice dokumenta Mjerenje brzine vrtnje kardanske osovine električnog automobila
No public access
undergraduate thesis
Mjerenje brzine vrtnje kardanske osovine električnog automobila
Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing, 2015. urn:nbn:hr:168:664429
Ivaniš, Tomislav
University of Zagreb
Faculty of Electrical Engineering and Computing

Institutional repository: FER Repository

Cite this document

Ivaniš, T. (2015). Mjerenje brzine vrtnje kardanske osovine električnog automobila (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:664429

Ivaniš, Tomislav. "Mjerenje brzine vrtnje kardanske osovine električnog automobila." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2015. https://urn.nsk.hr/urn:nbn:hr:168:664429

Ivaniš, Tomislav. "Mjerenje brzine vrtnje kardanske osovine električnog automobila." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2015. https://urn.nsk.hr/urn:nbn:hr:168:664429

Ivaniš, T. (2015). 'Mjerenje brzine vrtnje kardanske osovine električnog automobila', Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 27 December 2024, https://urn.nsk.hr/urn:nbn:hr:168:664429

Ivaniš T. Mjerenje brzine vrtnje kardanske osovine električnog automobila [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2015 [cited 2024 December 27] Available at: https://urn.nsk.hr/urn:nbn:hr:168:664429

T. Ivaniš, "Mjerenje brzine vrtnje kardanske osovine električnog automobila", Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2015. Available at: https://urn.nsk.hr/urn:nbn:hr:168:664429

Metadata
TitleMjerenje brzine vrtnje kardanske osovine električnog automobila
Title (english)Electric car cardan axle rotational speed measurement
AuthorTomislav Ivaniš
MentorMario Vražić (mentor)
Committee memberMario Vražić (predsjednik povjerenstva)
Committee memberDamir Vuljaj (član povjerenstva)
Committee memberMarinko Kovačić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2015-09-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
Tema ovog završnog rada je projektiranje senzora koji će mjeriti kutnu brzinu kardanske osovine automobila koji je prerađen u električni. U tu je svrhu između brojnih senzora odabran induktivni senzor zbog brzine odziva, robusnosti, te jednostavnosti ugradnje. Senzorski modul je potrebno smjestiti u prostor podvozja koji se nalazi poslije kardanskog zgloba automobila te izlazi iz mjenjačke kutije. U laboratoriju je način mjerenja te upravljački algoritam ispitan optičkim inkrementalnim enkoderom sa takozvanim ABZ signalnim izlazom. Signal koji je bilo potrebno obraditi kako bi se dobila jednakovrijedna usporedba sa induktivnim senzorskim modulom je bio Z impulsni signal. Obradi signala i računanju kutne brzine pristupilo se unutar programskog okruženja LabVIEW, uz korištenje postupka akvizicije podataka. Odgovarajućim upravljačkim algoritmom blokovskog dijagrama, uspješno je ostvaren mjerni pokazivač.
Abstract (english)
The subject of this thesis is to design a sensor that will be measuring the angular speed of the cardan axle on the electrically converted automobile. For this purpose, among many sensors, an inductive proximity sensor has been chosen thanks to it's responsiveness, robustness and the simplicity of it's mounting. The sensor needs to be put into a part of an underbody which comes after the universal joint of the automobile, and comes out of the gearbox. The algorithm was tested in a laboratory using an optical incremental encoder which uses the ABZ signal output. The signal that was needed to be analysed was the Z signal. The signal processing and the calculation of the angular velocity was done within the LabVIEW software environment, with the use of data acquisition technique. With the corresponding algorithm which uses the block diagram, the measuring indicator was successfully fulfilled.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:168:664429
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2018-02-06 09:16:35