prikaz prve stranice dokumenta Izrada modela DC/DC pretvarača u svrhu omogućavanja paralelnog rada baterijskih modula
No public access
master's thesis
Izrada modela DC/DC pretvarača u svrhu omogućavanja paralelnog rada baterijskih modula
Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing, 2023. urn:nbn:hr:168:941545
Anić Milić, Lara
University of Zagreb
Faculty of Electrical Engineering and Computing

Institutional repository: FER Repository

Cite this document

Anić Milić, L. (2023). Izrada modela DC/DC pretvarača u svrhu omogućavanja paralelnog rada baterijskih modula (Master's thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:941545

Anić Milić, Lara. "Izrada modela DC/DC pretvarača u svrhu omogućavanja paralelnog rada baterijskih modula." Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2023. https://urn.nsk.hr/urn:nbn:hr:168:941545

Anić Milić, Lara. "Izrada modela DC/DC pretvarača u svrhu omogućavanja paralelnog rada baterijskih modula." Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2023. https://urn.nsk.hr/urn:nbn:hr:168:941545

Anić Milić, L. (2023). 'Izrada modela DC/DC pretvarača u svrhu omogućavanja paralelnog rada baterijskih modula', Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 28 December 2024, https://urn.nsk.hr/urn:nbn:hr:168:941545

Anić Milić L. Izrada modela DC/DC pretvarača u svrhu omogućavanja paralelnog rada baterijskih modula [Master's thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2023 [cited 2024 December 28] Available at: https://urn.nsk.hr/urn:nbn:hr:168:941545

L. Anić Milić, "Izrada modela DC/DC pretvarača u svrhu omogućavanja paralelnog rada baterijskih modula", Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:168:941545

Metadata
TitleIzrada modela DC/DC pretvarača u svrhu omogućavanja paralelnog rada baterijskih modula
Title (english)Design of a DC/DC converter model for the purpose of enabling parallel operation of battery modules
AuthorLara Anić Milić
MentorMario Vražić (mentor)
Committee memberMario Vražić (predsjednik povjerenstva)
Committee memberZlatko Hanić (član povjerenstva)
Committee memberMarinko Kovačić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2023-07-03, Croatia
Abstract
U programskom okruženju PLECS ostvaren je model sustava napajanja električnog vozila. Sustav se sastoji od baterijskog paketa s tri modula, višeulaznog jednoizlaznog DC/DC pretvarača i strujnog izvora koji predstavlja teret. Napravljena je regulacija struja prema stanjima napunjenosti pojedinih modula i regulacija napona istosmjernog međukruga. Prikazane su ulazne i izlazne vrijednosti u režimima rada terećenja i kočenja. Zbog programskih ograničenja, prvo je napravljen prikaz rezultata na modelu s dvije grane, a u drugom dijelu simulacije rezultati na modelu s tri grane. Za potrebe povećanja kapaciteta tako bi se teoretski mogao dodati još proizvoljan broj grana, tj. modula. Osnovni princip rada ovakvog sustava je već implementiran, no nije u širokoj upotrebi. Daljnji razvoj ove ideje riješio bi jedan od problema nedovoljno razvijene infrastrukture električnih punionica omogućivši udaljeno punjenje modula baterijskog paketa.
Abstract (english)
In the PLECS programming environment, a model of the power supply system of an electric vehicle was achieved. The system consists of a battery pack with three modules, a multiple-input single-output DC/DC converter and a current source representing the load. The regulation of currents according to the states of charge of individual modules and the regulation of the voltage of the DC link have been adjusted. The input and output values in the loading and braking modes are shown. Due to program limitations, first the results were presented on the model with two branches, and in the second part of the simulation the results on the model with three branches. In order to increase the capacity, an arbitrary number of branches, i.e. modules, could theoretically be added. The basic operating principle of such a system has already been implemented, but it is not widely used. Further development of this idea would solve one of the problems of an underdeveloped infrastructure of electric charging stations by enabling remote charging of battery pack modules.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:168:941545
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka elektrotehnike i informacijske tehnologije (magistar/magistra inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2023-07-13 09:52:03