prikaz prve stranice dokumenta Optimizacija dizajna sinkronog motora s izmjenjivim magnetskim tokom u aksijalnoj izvedbi
No public access
master's thesis
Optimizacija dizajna sinkronog motora s izmjenjivim magnetskim tokom u aksijalnoj izvedbi
Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing, 2023. urn:nbn:hr:168:845931
Grđan, Ivo
University of Zagreb
Faculty of Electrical Engineering and Computing

Institutional repository: FER Repository

Cite this document

Grđan, I. (2023). Optimizacija dizajna sinkronog motora s izmjenjivim magnetskim tokom u aksijalnoj izvedbi (Master's thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:845931

Grđan, Ivo. "Optimizacija dizajna sinkronog motora s izmjenjivim magnetskim tokom u aksijalnoj izvedbi." Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2023. https://urn.nsk.hr/urn:nbn:hr:168:845931

Grđan, Ivo. "Optimizacija dizajna sinkronog motora s izmjenjivim magnetskim tokom u aksijalnoj izvedbi." Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2023. https://urn.nsk.hr/urn:nbn:hr:168:845931

Grđan, I. (2023). 'Optimizacija dizajna sinkronog motora s izmjenjivim magnetskim tokom u aksijalnoj izvedbi', Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 29 November 2024, https://urn.nsk.hr/urn:nbn:hr:168:845931

Grđan I. Optimizacija dizajna sinkronog motora s izmjenjivim magnetskim tokom u aksijalnoj izvedbi [Master's thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2023 [cited 2024 November 29] Available at: https://urn.nsk.hr/urn:nbn:hr:168:845931

I. Grđan, "Optimizacija dizajna sinkronog motora s izmjenjivim magnetskim tokom u aksijalnoj izvedbi", Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:168:845931

Metadata
TitleOptimizacija dizajna sinkronog motora s izmjenjivim magnetskim tokom u aksijalnoj izvedbi
Title (english)Optimisation of the axial flux variant of the flux switching synchronous motor
AuthorIvo Grđan
MentorZlatko Hanić (mentor)
Committee memberZlatko Hanić (predsjednik povjerenstva)
Committee memberDamir Žarko (član povjerenstva)
Committee memberStjepan Stipetić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2023-06-28, Croatia
Abstract
U okviru diplomskog rada povedena je optimizacija dizajna sinkronog motora s izmjenjivim magnetskim tokom u aksijalnoj izvedbi. Opisan je princip rada motora te su definirani zahtjevi kako bi se motor mogao koristiti za pogon električnog bicikla. Definiran je pojednostavljeni dvodimenzionalni model ekvivalentnog linearnog motora te je provedena parametrizacija. Za provedbu optimizacije dizajna motora definirani su ulazi, ciljevi i ograničenja na ulazne parametre. Pomoću elektromagnetskog izračuna dvodimenzionalnom metodom konačnih elemenata provedena je optimizacija gustoće snage stroja. Napravljena je verifikacija dobivenih parametara i karakteristika optimalnog motora pomoću trodimenzionalne metode konačnih elemenata. Kratko je analizirana upotreba feritniih magneta umjesto neodimijskih u optimalnom dizajnu stroja. Dane su preporuke za izradu prototipa motora.
Abstract (english)
As part of the thesis, the design optimization of the axial flux variant of the flux switching synchronous motor was presented. The principle operation of the motor is described and the requirements are defined so that the motor can drive an electric bicycle. A simplified two-dimensional model of an equivalent linear motor was defined and parameterization was elaborated. To implement motor design optimization, inputs, goals and constraints on input parameters are defined. Using electromagnetic two-dimensional finite element method power density of the motor was optimized. The obtained parameters and characteristics of the optimal engine were verified using the three-dimensional finite element method. The use of ferrite magnets instead of neodymium magnets in the optimal design of the machine is briefly analyzed. Recommendations are given for the prototype motor.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:168:845931
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka elektrotehnike i informacijske tehnologije (magistar/magistra inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2023-07-13 10:04:42