prikaz prve stranice dokumenta Izvedba modula za upravljačku ploču automobila s procesorom FRISC
No public access
undergraduate thesis
Izvedba modula za upravljačku ploču automobila s procesorom FRISC
Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing, 2015. urn:nbn:hr:168:375998
Liović, Ivan
University of Zagreb
Faculty of Electrical Engineering and Computing

Institutional repository: FER Repository

Cite this document

Liović, I. (2015). Izvedba modula za upravljačku ploču automobila s procesorom FRISC (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:375998

Liović, Ivan. "Izvedba modula za upravljačku ploču automobila s procesorom FRISC." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2015. https://urn.nsk.hr/urn:nbn:hr:168:375998

Liović, Ivan. "Izvedba modula za upravljačku ploču automobila s procesorom FRISC." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2015. https://urn.nsk.hr/urn:nbn:hr:168:375998

Liović, I. (2015). 'Izvedba modula za upravljačku ploču automobila s procesorom FRISC', Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:168:375998

Liović I. Izvedba modula za upravljačku ploču automobila s procesorom FRISC [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2015 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:168:375998

I. Liović, "Izvedba modula za upravljačku ploču automobila s procesorom FRISC", Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2015. Available at: https://urn.nsk.hr/urn:nbn:hr:168:375998

Metadata
TitleIzvedba modula za upravljačku ploču automobila s procesorom FRISC
Title (english)Implementation of car control panel modules based on FRISC processor
AuthorIvan Liović
MentorMario Kovač (mentor)
Committee memberMario Kovač (predsjednik povjerenstva)
Committee memberDaniel Hofman (član povjerenstva)
Committee memberIvana Bosnić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2015-07-13, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Computing
Abstract
Zadatak je bio simulirati rad jedne upravljačke ploče automobila. Prilikom simulacije dijela ploče koji se tiče brzinomjera i senzora bilo je potrebno integrirati novo brojilo u opis sustava FRISC, koristeći jezik za opis računalnih sustava VHDL. Za simulaciju brzinomjera odabrao sam koristiti reed relej i magnet. Također da bi simulacija izgledala stvarnije, napravljen je i kotač, koji će simulirati pravi kotač automobila. Prilikom vrtnje kotača bilježi se broj okretaja te se pomoću toga računa trenutna brzina. Trenutna brzina se ispisuje na unaprijed određeno mjesto na LCD zaslonu. Prilikom bilježenja okretaja povremeno bi se dogodile smetnje signala, te sam zbog toga dodao pull down otpornik i „debouncing“ signala. Za simulaciju pokazivača smjera i senzora vrata korišteni su prekidači koji se nalaze na E2LP ploči. Ispitivanjem stanja prekidača utvrđuje se stanje pojedinih vrata i pokazivača smjera. Kako bi se brzinomjer, pokazivači smjera i stanje vrata mogli negdje prikazati, koristi se TFT LCD ekran. Uz brzinomjer i senzore kontrolna ploča automobila sadrži i prikaz trenutne temperature, GPS simulator, te prikaz točnog vremena. Točno vrijeme i temperaturu šalju nam temperaturni senzor te RTC modul.
Abstract (english)
The assignment was to simulate the operation of a car control panel. During the simulation of a part related to speedometer and sensor, a new counter had to be integrated into the description of the FRISC system. The VHDL, hardware description language, was used for the purpose. I used a reed relay and a magnet for the simulation of the speedometer. To make the simulation more realistic, I made a wheel as well. During the rotation of the wheel, number of circles is recorded and used to calculate the speed. Speed is printed on LCD screen. Sometimes, bouncing of the signal would appear and because of that I added pull down resistor and debouncing of the signal. Switches which are found on the E2LP board were used for the simulation of indicator switches and door sensors. The states of the switches determines the states of the door and indicator switches. To make everything visible, a TFT LCD screen was used. Besides speedometer and sensors, the car control panel also contains a temperature indicator, GPS simulator as well as time indicator. Current temperature and time is sent by temperature sensor and RTC module respectively.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:168:375998
Study programmeTitle: Computing
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka računarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka računarstva)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2018-02-06 10:07:52