prikaz prve stranice dokumenta Automatizacija elektromotornog pogona sa sinkronim strojem s trajnim magnetima i inkrementalnim enkoderom
No public access
undergraduate thesis
Automatizacija elektromotornog pogona sa sinkronim strojem s trajnim magnetima i inkrementalnim enkoderom
Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing, 2015. urn:nbn:hr:168:752922
Ratkaj, Bruno
University of Zagreb
Faculty of Electrical Engineering and Computing

Institutional repository: FER Repository

Cite this document

Ratkaj, B. (2015). Automatizacija elektromotornog pogona sa sinkronim strojem s trajnim magnetima i inkrementalnim enkoderom (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:752922

Ratkaj, Bruno. "Automatizacija elektromotornog pogona sa sinkronim strojem s trajnim magnetima i inkrementalnim enkoderom." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2015. https://urn.nsk.hr/urn:nbn:hr:168:752922

Ratkaj, Bruno. "Automatizacija elektromotornog pogona sa sinkronim strojem s trajnim magnetima i inkrementalnim enkoderom." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2015. https://urn.nsk.hr/urn:nbn:hr:168:752922

Ratkaj, B. (2015). 'Automatizacija elektromotornog pogona sa sinkronim strojem s trajnim magnetima i inkrementalnim enkoderom', Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 25 December 2024, https://urn.nsk.hr/urn:nbn:hr:168:752922

Ratkaj B. Automatizacija elektromotornog pogona sa sinkronim strojem s trajnim magnetima i inkrementalnim enkoderom [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2015 [cited 2024 December 25] Available at: https://urn.nsk.hr/urn:nbn:hr:168:752922

B. Ratkaj, "Automatizacija elektromotornog pogona sa sinkronim strojem s trajnim magnetima i inkrementalnim enkoderom", Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2015. Available at: https://urn.nsk.hr/urn:nbn:hr:168:752922

Metadata
TitleAutomatizacija elektromotornog pogona sa sinkronim strojem s trajnim magnetima i inkrementalnim enkoderom
Title (english)Automation of drive with permanent magnet synchronous machine and incremental encoder
AuthorBruno Ratkaj
MentorDamir Sumina (mentor)
Committee memberDamir Sumina (predsjednik povjerenstva)
Committee memberIgor Erceg (član povjerenstva)
Committee memberMartina Kutija (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2015-07-13, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
Automatizacija je izvedena upotrebom programirljivog logičkog kontrolera serije S7-1500 koji PROFINET mrežom naredbe šalje frekvencijskom pretvaraču SINAMICS S120. Preko pretvarača se onda odvija upravljanje sinkronog motora s trajnim magnetima i inkrementalnim enkoderom. Konfiguracija i parametriranje pretvarača vrši se upotrebom programa STARTER, dok konfiguracija, izrada programa upravljanja i sučelja čovjek stroj(HMI) upotrebom TIA-Portal-a. Komunikacija između PLC-a i pretvarača vrši se upotrebom telegrama sa po dvjema riječima za slanje i dvjema za primanje poruka. Programiranje PLC-a odvija se ljestvičastim dijagramima. U slučaju nedostatka HMI panela moguće je izvesti simulaciju te na taj način provjeriti zadani rad.
Abstract (english)
Automation is performed using programmable logical controller series S7-1500 which is sending commands to the frequency converter SINAMICS S120 using PROFINET network. Control of the synchronous machine with permanent magnets and incremental encoder is carried out using the converter. Configuration and parameterisation of the converter is carried out using the program STARTER, while configuration, designing of the program and Human-Machine Interface using TIA-Portal. Communication between PLC and converter is performed using telegrams with two words for sending and two words for receiving messages. PLC programming is carried out using ladder diagrams. If there is no HMI panel it is possible to simulate its work and thereby check given tasks.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:168:752922
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2018-02-06 11:32:52