prikaz prve stranice dokumenta Bežično napajanje korištenjem trećeg namota za napajanje reaktivnom snagom
No public access
master's thesis
Bežično napajanje korištenjem trećeg namota za napajanje reaktivnom snagom
Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing, 2015. urn:nbn:hr:168:205609
Šalković, Ivan
University of Zagreb
Faculty of Electrical Engineering and Computing

Institutional repository: FER Repository

Cite this document

Šalković, I. (2015). Bežično napajanje korištenjem trećeg namota za napajanje reaktivnom snagom (Master's thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:205609

Šalković, Ivan. "Bežično napajanje korištenjem trećeg namota za napajanje reaktivnom snagom." Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2015. https://urn.nsk.hr/urn:nbn:hr:168:205609

Šalković, Ivan. "Bežično napajanje korištenjem trećeg namota za napajanje reaktivnom snagom." Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2015. https://urn.nsk.hr/urn:nbn:hr:168:205609

Šalković, I. (2015). 'Bežično napajanje korištenjem trećeg namota za napajanje reaktivnom snagom', Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 05 October 2024, https://urn.nsk.hr/urn:nbn:hr:168:205609

Šalković I. Bežično napajanje korištenjem trećeg namota za napajanje reaktivnom snagom [Master's thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2015 [cited 2024 October 05] Available at: https://urn.nsk.hr/urn:nbn:hr:168:205609

I. Šalković, "Bežično napajanje korištenjem trećeg namota za napajanje reaktivnom snagom", Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2015. Available at: https://urn.nsk.hr/urn:nbn:hr:168:205609

Metadata
TitleBežično napajanje korištenjem trećeg namota za napajanje reaktivnom snagom
Title (english)Wireless charging using a separate third winding for reactive power supply
AuthorIvan Šalković
MentorŽeljko Štih (mentor)
Committee memberŽeljko Štih (predsjednik povjerenstva)
Committee memberMartin Dadić (član povjerenstva)
Committee memberBojan Trkulja (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2015-07-06, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
Predmet istraživanja ovog diplomskog rada, kako teorijski tako i eksperimentalno, bila su tri različita modela bežičnog napajanja. Prvi model koji je bio ispitivan je bio osnovni model bežičnog napajanja s dva namota u kojem su kondenzatori povezani u seriju sa zavojnicama. Treći namot, čija je uloga osiguravanje reaktivne snage, je postavljen na primarni namot te su ispitivane dvije različite topologije modela bežičnog napajanja s tri namota i uspoređene su s osnovnim modelom. Prvi model bežičnog napajanja s tri namota imao je kondenzator spojen u seriju sa sekundarnom i tercijarnom zavojnicom, dok je drugi model imao kondenzator spojen u seriju sa svakom od tri zavojnice. Kako bi se predvidjelo ponašanje svakog od triju modela bežičnog napajanja, napravljeni su simulacijski modeli u programskom paketu Matlab/Simulink, kao Bodeovi dijagrami prijenosnih funkcija svakog sustava. Nakon laboratorijskih ispitivanja, utvrđeno je da najvišu korisnost ima osnovni model bežičnog napajanja s dva namota koja je iznosila 64%. Model bežičnog napajanja s tri zavojnice i dva kondenzatora imao je korisnost od 57%, dok je model s tri kondenzatora imao korisnost od 61%. Navedene vrijednosti korisnosti su niže u odnosu na uobičajene vrijednosti modela bežičnog napajanja za male snage, a glavni razlog tome je što su prisutni visoki gubici u bakru.
Abstract (english)
In this thesis, three different models of wireless charging systems were investigated theoretically and experimentally. The first model that was evaluated was a basic model of a two winding wireless charging system with a capacitor connected in series with each of the coils. An auxiliary winding was added on top of the transmitter coil in order to provide the reactive power and two different topologies of three winding wireless transfer systems were compared to a basic model. The first three winding model had a capacitor connected in series in the receiver loop and in the auxiliary loop, while the last model of a wireless charging system had a capacitor in every loop. In order to predict the behaviour of each wireless charging system, a simulation in Matlab/Simulink was made, as well as the Bode plot for the transfer function of each system. After some practical measurements, it was found that the best overall efficiency was for a basic two winding model, which was 64%. The three winding model with two capacitors had 57% efficiency, while the model with three capacitors had 61% efficiency. These values are rather low compared to the usual values of the efficiency for a wireless charging system for low power, and the main reason is that there were high copper losses, because Litz wires were not used in the experiment.
Keywords
Keywords (english)
Languageenglish
URN:NBNurn:nbn:hr:168:205609
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka elektrotehnike i informacijske tehnologije (magistar/magistra inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2018-02-06 12:10:39