prikaz prve stranice dokumenta Izrada tiskane relejne pločice za punjenje baterija pomoću mikrokontrolera
No public access
undergraduate thesis
Izrada tiskane relejne pločice za punjenje baterija pomoću mikrokontrolera
Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing, 2015. urn:nbn:hr:168:510125
Štor, Anthea
University of Zagreb
Faculty of Electrical Engineering and Computing

Institutional repository: FER Repository

Cite this document

Štor, A. (2015). Izrada tiskane relejne pločice za punjenje baterija pomoću mikrokontrolera (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:510125

Štor, Anthea. "Izrada tiskane relejne pločice za punjenje baterija pomoću mikrokontrolera." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2015. https://urn.nsk.hr/urn:nbn:hr:168:510125

Štor, Anthea. "Izrada tiskane relejne pločice za punjenje baterija pomoću mikrokontrolera." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2015. https://urn.nsk.hr/urn:nbn:hr:168:510125

Štor, A. (2015). 'Izrada tiskane relejne pločice za punjenje baterija pomoću mikrokontrolera', Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 14 November 2024, https://urn.nsk.hr/urn:nbn:hr:168:510125

Štor A. Izrada tiskane relejne pločice za punjenje baterija pomoću mikrokontrolera [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2015 [cited 2024 November 14] Available at: https://urn.nsk.hr/urn:nbn:hr:168:510125

A. Štor, "Izrada tiskane relejne pločice za punjenje baterija pomoću mikrokontrolera", Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2015. Available at: https://urn.nsk.hr/urn:nbn:hr:168:510125

Metadata
TitleIzrada tiskane relejne pločice za punjenje baterija pomoću mikrokontrolera
Title (english)Circuit relay board for charging batteries using a microcontroller
AuthorAnthea Štor
MentorMario Vražić (mentor)
Committee memberMario Vražić (predsjednik povjerenstva)
Committee memberDamir Vuljaj (član povjerenstva)
Committee memberMartina Kutija (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2015-09-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
Zbog potrebe za većom korisnošću i duljim životnim vijekom baterija koristi se sustav upravljanja baterijama. To posebice vrijedi za litij ionske baterije, koje zbog svoje osjetljivosti na prepunjavanje i pretjerano pražnjenje zahtijevaju strogi nadzor u svrhu produživanja životnog vijeka. Sustav upravljanja zasnovan je na ideji punjenja svih ćelija istovremeno dok se jedna od ćelija ne napuni na maksimalni dozvoljeni napon, a onda se prelazi na pojedinačno punjenje ćelija. Kao dio tog sustava, zadatak je bio izraditi relejnu pločicu koja omogućuje da mikrokontroler upravlja punjenjem ćelija strujom do maksimalno 30 A. Pločica također služi i za mjerenje napona na ćelijama. U ovom radu su navedene komponente koje se nalaze na pločici uz obrazloženje zašto su one stavljene na pločicu. Također, dokumentiran je postupak izrade same pločice.
Abstract (english)
Battery management system is used because of the need for greater and longer cycle life of the batteries. This is especially true for lithium ion batteries , which because of its sensitivity to overcharging and over-discharge require strict control in order to prolong the life of the battery . The management system is based on the idea of charging the battery until one cell is filled to the maximum permitted voltage, and then switches to charging cells separately . As part of that system, the task was to circuit relay board that allows microcontroller manages charging cells with current that is up to 30A. The board also serves to measure the voltage on the cells. In this document, components that are on the board are listed and explained. There is documented process of making PCB, too.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:168:510125
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2018-02-06 12:24:55