prikaz prve stranice dokumenta Konfigurabilni uređaj za ispitivanje ispravnosti višežilnih kabela
No public access
undergraduate thesis
Konfigurabilni uređaj za ispitivanje ispravnosti višežilnih kabela
Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing, 2018. urn:nbn:hr:168:168448
Berać, Luka
University of Zagreb
Faculty of Electrical Engineering and Computing

Institutional repository: FER Repository

Cite this document

Berać, L. (2018). Konfigurabilni uređaj za ispitivanje ispravnosti višežilnih kabela (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:168448

Berać, Luka. "Konfigurabilni uređaj za ispitivanje ispravnosti višežilnih kabela." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2018. https://urn.nsk.hr/urn:nbn:hr:168:168448

Berać, Luka. "Konfigurabilni uređaj za ispitivanje ispravnosti višežilnih kabela." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2018. https://urn.nsk.hr/urn:nbn:hr:168:168448

Berać, L. (2018). 'Konfigurabilni uređaj za ispitivanje ispravnosti višežilnih kabela', Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 20 October 2024, https://urn.nsk.hr/urn:nbn:hr:168:168448

Berać L. Konfigurabilni uređaj za ispitivanje ispravnosti višežilnih kabela [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2018 [cited 2024 October 20] Available at: https://urn.nsk.hr/urn:nbn:hr:168:168448

L. Berać, "Konfigurabilni uređaj za ispitivanje ispravnosti višežilnih kabela", Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:168:168448

Metadata
TitleKonfigurabilni uređaj za ispitivanje ispravnosti višežilnih kabela
Title (english)Configurable Device for Multicore Cables Testing
AuthorLuka Berać
MentorHrvoje Džapo (mentor)
Committee memberHrvoje Džapo (predsjednik povjerenstva)
Committee memberSaša Tepić (član povjerenstva)
Committee memberIvan Pavić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2018-07-13, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Computing
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
U ovom radu razvijen je uređaj koji omogućuje automatizirano testiranje višežilnih kabela. Kabeli se spajaju na dva konektora, po jedan kraj kabela na svaki konektor. Ovisno o tipu kabela koji je opisan u digitalnom obliku, mikrokontroler upravlja sekvencom generiranja pobude na jednom konektoru i promatra odziv s drugog konektora. Dovode se ispitni podražaji i čitaju očekivani odzivi na temelju kojih se mogu detektirati prekidi i nedozvoljeni kratki spojevi. U slučaju da je cijela sekvenca testiranja prošla ispravno, upalit će se signalna LED dioda i o tome obavijestiti korisnik, a ako nije, upalit će se druga LED dioda kako bi korisnik znao da nešto nije u redu. Uređaj je povezan s računalom s kojeg se šalje ispitna konfiguracija, a uređaj vraća rezultate ispitivanja te se oni ispisuju na zaslonu računala.
Abstract (english)
In this thesis an electronic device for automated testing of multicore cables was developed. The cable under test is connected to the test device via two connectors, each end of the cable to one connector. Depending on the cable type described in a digital form, the microcontroller generates a test stimuli sequence on one connector and monitors the response of the cable on the other connector. Test stimuli are applied to each pin of the cable and based on the expected responses read on the other end the system can detect broken wires or unexpected short circuits within the cable. In case that the entire test sequence is successful, LED indicator will inform the user that everything is fine, otherwise the other LED indicator will indicate a faulty cable. Device is connected to a personal computer which sends the testing configuration to the device, while the device returns the testing results for informing the user about the status of cable testing.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:168:168448
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2019-03-13 19:01:33