prikaz prve stranice dokumenta Automatizacija modela obradnog centra s okretnim stolom upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku SCL
No public access
undergraduate thesis
Automatizacija modela obradnog centra s okretnim stolom upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku SCL
Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing, 2018. urn:nbn:hr:168:182589
Gregorić, Luka
University of Zagreb
Faculty of Electrical Engineering and Computing

Institutional repository: FER Repository

Cite this document

Gregorić, L. (2018). Automatizacija modela obradnog centra s okretnim stolom upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku SCL (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:182589

Gregorić, Luka. "Automatizacija modela obradnog centra s okretnim stolom upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku SCL." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2018. https://urn.nsk.hr/urn:nbn:hr:168:182589

Gregorić, Luka. "Automatizacija modela obradnog centra s okretnim stolom upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku SCL." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2018. https://urn.nsk.hr/urn:nbn:hr:168:182589

Gregorić, L. (2018). 'Automatizacija modela obradnog centra s okretnim stolom upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku SCL', Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 25 December 2024, https://urn.nsk.hr/urn:nbn:hr:168:182589

Gregorić L. Automatizacija modela obradnog centra s okretnim stolom upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku SCL [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2018 [cited 2024 December 25] Available at: https://urn.nsk.hr/urn:nbn:hr:168:182589

L. Gregorić, "Automatizacija modela obradnog centra s okretnim stolom upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku SCL", Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:168:182589

Metadata
TitleAutomatizacija modela obradnog centra s okretnim stolom upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku SCL
Title (english)Automation of turning center with rotary table using programmable logic controller S7-1500 in programming language SCL
AuthorLuka Gregorić
MentorDamir Sumina (mentor)
Committee memberDamir Sumina (predsjednik povjerenstva)
Committee memberLuka Pravica (član povjerenstva)
Committee memberFilip Jukić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2018-07-13, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
U ovom je radu realiziran algoritam upravljanja modelom obradnog centra s rotirajućim stolom upotrebom programskog jezika SCL. Model obradnog centra reprezentira industrijsko postrojenje za prešanje gdje se transport predmeta obavlja navedenim rotirajućim stolom. Za realizaciju sustava automatizacije korišten je programirljivi logički kontroler (PLC) Siemens S7-1500 i programski alati TIA Portal (Step7, WinCC). Izrađeno je programsko rješenje upravljanja, vizualizacijsko sučelje kojim je moguće upravljati postrojenjem te je taj model postrojenja testiran kako bi se utvrdile eventualne greške i mogućnosti za poboljšanje algoritma.
Abstract (english)
This paper contains the realization of the algorithm for the control of the machining center model with a rotating table. The processing center model represents an industrial press facility where the processed item is transported via rotating table. Algorithm is implemented using the SCL programming language on the Siemens S7-1500 programmable logic controller (PLC) with the help of TIA Portal software (Step7, WinCC). A program solution was developed as well as visualization interface which can be used to manage the model plant. Model of the plant was tested to determine any possible errors as well as possibilities to improve the algorithm.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:168:182589
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2019-03-13 20:36:22