prikaz prve stranice dokumenta Upravljanje modelom skladišta upotrebom programirljivog logičkog kontrolera S7-1200 u programskom jeziku SCL
No public access
master's thesis
Upravljanje modelom skladišta upotrebom programirljivog logičkog kontrolera S7-1200 u programskom jeziku SCL
Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing, 2017. urn:nbn:hr:168:740750
Kurić, Đani
University of Zagreb
Faculty of Electrical Engineering and Computing

Institutional repository: FER Repository

Cite this document

Kurić, Đ. (2017). Upravljanje modelom skladišta upotrebom programirljivog logičkog kontrolera S7-1200 u programskom jeziku SCL (Master's thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:740750

Kurić, Đani. "Upravljanje modelom skladišta upotrebom programirljivog logičkog kontrolera S7-1200 u programskom jeziku SCL." Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2017. https://urn.nsk.hr/urn:nbn:hr:168:740750

Kurić, Đani. "Upravljanje modelom skladišta upotrebom programirljivog logičkog kontrolera S7-1200 u programskom jeziku SCL." Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2017. https://urn.nsk.hr/urn:nbn:hr:168:740750

Kurić, Đ. (2017). 'Upravljanje modelom skladišta upotrebom programirljivog logičkog kontrolera S7-1200 u programskom jeziku SCL', Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 25 December 2024, https://urn.nsk.hr/urn:nbn:hr:168:740750

Kurić Đ. Upravljanje modelom skladišta upotrebom programirljivog logičkog kontrolera S7-1200 u programskom jeziku SCL [Master's thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2017 [cited 2024 December 25] Available at: https://urn.nsk.hr/urn:nbn:hr:168:740750

Đ. Kurić, "Upravljanje modelom skladišta upotrebom programirljivog logičkog kontrolera S7-1200 u programskom jeziku SCL", Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:168:740750

Metadata
TitleUpravljanje modelom skladišta upotrebom programirljivog logičkog kontrolera S7-1200 u programskom jeziku SCL
Title (english)Control of warehouse model using programmable logic controller S7-1200 in programming language SCL
AuthorĐani Kurić
MentorDamir Sumina (mentor)
Committee memberDamir Sumina (predsjednik povjerenstva)
Committee memberIgor Erceg (član povjerenstva)
Committee memberŠandor Ileš (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2017-02-10, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
Automatsko upravljanje modelom skladišta ostvareno je korištenjem Siemens S7-1200 programibilnog logičkog kontrolera. Upravljanje modelom vrši se korištenjem dva 24V elektromotora s promjenom smjera vrtnje, dva enkoderska motora, dva foto senzora, te četiri graničnika. Komunikacija između PLC-a i računala ostvarena je PROFINET vezom. Cjelokupna programska potpora izrađena je korištenjem strukturiranog kontrolnog jezika (SCL) u programskom paketu SINAMICS STEP 7 (TIA Portal). Za izradu SCADA sustava korišten je programski alat WinCC RT Advanced. Rezultat projekta je potpuno upravljivi rad modela skladišta kako u ručnom, tako i u automatskom režimu rada. Upotrebom vizualizacijskog sučelja rad modela je eksperimentalno ispitan.
Abstract (english)
Automatic control of high-bay warehouse has been made using Siemens S7-1200 programmable logic controller. The model consists of two 24V electric motors with relays to reverse polarity, two encoder motors, two photo-sensors and four push buttons. Communication between the PLC and the computer has been made using PROFINET connection. The complete program support was made using a structured control language (SCL) in software package SINAMICS STEP 7 (TIA Portal). A software tool WinCC RT Advanced was used to create SCADA system. The result of the project is fully controllable operations of high-bay warehouse in both manual and automatic mode. The functionality of warehouse is experimentally tested using visualization interface.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:168:740750
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka elektrotehnike i informacijske tehnologije (magistar/magistra inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2019-03-13 22:08:19