prikaz prve stranice dokumenta Automatizacija modela peći s pneumatskim kliznim vratima upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku FBD
No public access
undergraduate thesis
Automatizacija modela peći s pneumatskim kliznim vratima upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku FBD
Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing, 2017. urn:nbn:hr:168:299888
Lipnjak, Mario
University of Zagreb
Faculty of Electrical Engineering and Computing

Institutional repository: FER Repository

Cite this document

Lipnjak, M. (2017). Automatizacija modela peći s pneumatskim kliznim vratima upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku FBD (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:299888

Lipnjak, Mario. "Automatizacija modela peći s pneumatskim kliznim vratima upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku FBD." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2017. https://urn.nsk.hr/urn:nbn:hr:168:299888

Lipnjak, Mario. "Automatizacija modela peći s pneumatskim kliznim vratima upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku FBD." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2017. https://urn.nsk.hr/urn:nbn:hr:168:299888

Lipnjak, M. (2017). 'Automatizacija modela peći s pneumatskim kliznim vratima upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku FBD', Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 14 November 2024, https://urn.nsk.hr/urn:nbn:hr:168:299888

Lipnjak M. Automatizacija modela peći s pneumatskim kliznim vratima upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku FBD [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2017 [cited 2024 November 14] Available at: https://urn.nsk.hr/urn:nbn:hr:168:299888

M. Lipnjak, "Automatizacija modela peći s pneumatskim kliznim vratima upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku FBD", Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:168:299888

Metadata
TitleAutomatizacija modela peći s pneumatskim kliznim vratima upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku FBD
Title (english)Automation of furnace model with pneumatic sliding door using programmable logic controller S7-1500 in programming language FBD
AuthorMario Lipnjak
MentorDamir Sumina (mentor)
Committee memberDamir Sumina (predsjednik povjerenstva)
Committee memberDamir Vuljaj (član povjerenstva)
Committee memberLuka Pravica (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2017-07-10, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
Završni rad sadržava kratki teorijski uvod o tome što je to programirljivi logički kontroler (PLC), čemu služi te koje su njegove mogućnosti po pitanju upravljanja te komunikacije s ostalim uređajima. Za realizaciju sustava automatizacije koristi se programirljivi logički kontroler Siemens S7-1500 i programski alat TIA Portal koji sadržava alate STEP 7 za izradu programa te WinCC za izradu sučelja čovjek-stroj (HMI). Glavni dio rada sastoji se od izrade algoritma upravljanja modelom peći s pneumatskim kliznim vratima koji se programira upotrebom programskog jezika FBD (funkcijski blokovski dijagram). Programski kod je strukturiran u funkcije (FC) koje se bezuvjetno izvode u organizacijskom bloku 1 (OB1) s cikličkim neprestanim ponavljanjem. Upravljanje modelom peći izvršava se pomoću načinjenog HMIom.
Abstract (english)
Bachelor thesis contains a brief theoretical introduction to the programmable logic controller (PLC), its use and what are its capabilities in terms of management and communication with other devices. Automation system is programmed using the programmable logic controller Siemens S7-1500 and the programming tool TIA Portal, which contains the STEP 7 tools for programming and WinCC for the creation of the human machine interface (HMI). The main part of the work consists of the production of an management algorithm of furnace model with a pneumatic sliding door programmed using the programming language FBD (function block diagram). The programming code is structured in functions (FC) that are unconditionally performed in organization block 1 (OB1) with cyclic continuous repetition. The furnace model automation is performed using a built-in HMI.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:168:299888
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2019-03-13 22:18:45