prikaz prve stranice dokumenta Automatizacija modela autopraonice upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku SCL
No public access
undergraduate thesis
Automatizacija modela autopraonice upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku SCL
Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing, 2019. urn:nbn:hr:168:256340
Ilić, Marko
University of Zagreb
Faculty of Electrical Engineering and Computing

Institutional repository: FER Repository

Cite this document

Ilić, M. (2019). Automatizacija modela autopraonice upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku SCL (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:256340

Ilić, Marko. "Automatizacija modela autopraonice upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku SCL." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2019. https://urn.nsk.hr/urn:nbn:hr:168:256340

Ilić, Marko. "Automatizacija modela autopraonice upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku SCL." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2019. https://urn.nsk.hr/urn:nbn:hr:168:256340

Ilić, M. (2019). 'Automatizacija modela autopraonice upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku SCL', Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:168:256340

Ilić M. Automatizacija modela autopraonice upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku SCL [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2019 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:168:256340

M. Ilić, "Automatizacija modela autopraonice upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku SCL", Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:168:256340

Metadata
TitleAutomatizacija modela autopraonice upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku SCL
Title (english)Automation of car wash model using programmable logic controller S7-1500 in SCL programming language
AuthorMarko Ilić
MentorDamir Sumina (mentor)
Committee memberDamir Sumina (predsjednik povjerenstva)
Committee memberKarla Draženović (član povjerenstva)
Committee memberŠandor Ileš (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2019-07-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
Završni rad opisuje rad programirljivog logičkog kontrolera (PLC) i rad SIMATIC ET200S. Također, prikazani su i objašnjeni svi dijelovi modela autopraonice koja se koristi pri izradi rada. Prilikom izrade završnog rada korišten je programski paket „TIA Portal“ unutar kojeg su alati „STEP 7“, koji se koristio za pisanje programskog kôda, te programski alat „WinCC Professional“ za izradu sučelja čovjek-stroj. Glavni cilj završnog rada je stvaranje algoritma koji omogućuje pranje i sušenje automobila putem automatizirane autopraonice. Programski kôd pisan je SCL programskim jezikom. Napravljeno je i sučelje čovjek-stroj (HMI) koje omogućuje korisniku lakše nadgledanje i jednostavnije upravljanje modelom autopraonice.
Abstract (english)
This baccalaureate thesis presents a working process of Programmable Logical Controller (PLC) and a working process of SIMATIC ET200S. Moreover, all parts of the presented car wash model are shown and explained. In this work, a "TIA Portal" software package was used, including the "STEP 7" tool used to write the program code and the "WinCC Professional" tool for creating a human-machine interface. The main aim of this work is to create an algorithm that allows washing and drying of cars through automated car wash. The programming code was written in the SCL programming language. The human-machine interface (HMI) has been created, which enables the user to easily monitor and simplify the management of the car wash model.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:168:256340
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2020-01-07 18:29:51