prikaz prve stranice dokumenta Projektiranje sklopa za generiranje referentnog napona i struje u 180 nm CMOS tehnologiji
No public access
undergraduate thesis
Projektiranje sklopa za generiranje referentnog napona i struje u 180 nm CMOS tehnologiji
Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing, 2019. urn:nbn:hr:168:410722
Osmanović, David
University of Zagreb
Faculty of Electrical Engineering and Computing

Institutional repository: FER Repository

Cite this document

Osmanović, D. (2019). Projektiranje sklopa za generiranje referentnog napona i struje u 180 nm CMOS tehnologiji (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:410722

Osmanović, David. "Projektiranje sklopa za generiranje referentnog napona i struje u 180 nm CMOS tehnologiji." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2019. https://urn.nsk.hr/urn:nbn:hr:168:410722

Osmanović, David. "Projektiranje sklopa za generiranje referentnog napona i struje u 180 nm CMOS tehnologiji." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2019. https://urn.nsk.hr/urn:nbn:hr:168:410722

Osmanović, D. (2019). 'Projektiranje sklopa za generiranje referentnog napona i struje u 180 nm CMOS tehnologiji', Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 16 January 2025, https://urn.nsk.hr/urn:nbn:hr:168:410722

Osmanović D. Projektiranje sklopa za generiranje referentnog napona i struje u 180 nm CMOS tehnologiji [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2019 [cited 2025 January 16] Available at: https://urn.nsk.hr/urn:nbn:hr:168:410722

D. Osmanović, "Projektiranje sklopa za generiranje referentnog napona i struje u 180 nm CMOS tehnologiji", Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:168:410722

Metadata
TitleProjektiranje sklopa za generiranje referentnog napona i struje u 180 nm CMOS tehnologiji
Title (english)Design of reference voltage and current generator in 180-nm CMOS technology
AuthorDavid Osmanović
MentorAdrijan Barić (mentor)
Committee memberAdrijan Barić (predsjednik povjerenstva)
Committee memberJosip Bačmaga (član povjerenstva)
Committee memberVlatko Galić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2019-07-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Computing
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
Microelectronics and integrated circuits represent the backbone of modern civilization. Reference voltage and current generators and reference resistors are basic building blocks of integrated circuits. The topic of this thesis is the design of a reference voltage and current generator in 180-nm CMOS technology. This circuit generates two referent voltages, one proportional to absolute temperature (PTAT) and the other one constant with temperature (CWT). The nominal value of the PTAT voltage is 0.35 V, while the CWT voltage is 0.6 V. The circuit also generates two 50 nA PTAT currents. The nominal supply voltage is 1.2 V and the nominal current consumption is 250 nA. The goal is to ensure a successful startup of the circuit when the supply voltage transitions from 0 to 1.2 V for the rise time between 1 us and 1 ms. Also, it is necessary to perform a temperature analysis in the range of -40 degrees C to 125 degrees C and corner analysis. It needs to be ensured that the circuit can start when the enable signal EN is high, and powers off when the enable goes low. Finally, all circuit characteristics have to be represented in graphical and tabular form.
Abstract (english)
Mikroelektronika i integrirani sklopovi predstavljaju okosnicu moderne civilizacije. Sklopovi za generiranje referentnog napona, referentne struje ili referentnog otpora osnovni su gradivi blokovi kod integriranih sklopova. U ovom radu potrebno je u 180 nm CMOS tehnologiji projektirati referentni generator napona i struje. Sklop generira dva referentna napona od kojih je napon od 0,35 V proporcionalan apsolutnoj temperaturi (PTAT), a napon od 0,6 V je konstanta s obzirom na apsolutnu temperaturu. Sklop također generira i dvije struje od 50 nA koje su obadvije PTAT. Sklop radi pri naponu od 1,2 V i troši u nominalnim uvjetima struju od 250 nA ili manje. Osigurati uspješan početak rada sklopa kada se napon napajanja polako diže s vrijednosti 0 na vrijednost 1,2 V u vremenu od 1 us i u vremenu od 1 ms. Provesti analizu za temperature u rasponu od -40 stupnjeva C do 125 stupnjeva C te analizu za rubne tehnologiju. Osigurati da se cijeli sklop može uključiti ili isključiti preko digitalnog signala EN (enable). Grafički i tablično prikazati sve značajne karakteristike sklopa.
Keywords
Keywords (english)
Languageenglish
URN:NBNurn:nbn:hr:168:410722
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2020-01-07 20:51:15