prikaz prve stranice dokumenta Estimacija sile vrha alata manipulatora pričvršćenog na bespilotnu letjelicu
No public access
master's thesis
Estimacija sile vrha alata manipulatora pričvršćenog na bespilotnu letjelicu
Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing, 2019. urn:nbn:hr:168:944230
Turković, Krešimir
University of Zagreb
Faculty of Electrical Engineering and Computing

Institutional repository: FER Repository

Cite this document

Turković, K. (2019). Estimacija sile vrha alata manipulatora pričvršćenog na bespilotnu letjelicu (Master's thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:944230

Turković, Krešimir. "Estimacija sile vrha alata manipulatora pričvršćenog na bespilotnu letjelicu." Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2019. https://urn.nsk.hr/urn:nbn:hr:168:944230

Turković, Krešimir. "Estimacija sile vrha alata manipulatora pričvršćenog na bespilotnu letjelicu." Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2019. https://urn.nsk.hr/urn:nbn:hr:168:944230

Turković, K. (2019). 'Estimacija sile vrha alata manipulatora pričvršćenog na bespilotnu letjelicu', Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 25 July 2024, https://urn.nsk.hr/urn:nbn:hr:168:944230

Turković K. Estimacija sile vrha alata manipulatora pričvršćenog na bespilotnu letjelicu [Master's thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2019 [cited 2024 July 25] Available at: https://urn.nsk.hr/urn:nbn:hr:168:944230

K. Turković, "Estimacija sile vrha alata manipulatora pričvršćenog na bespilotnu letjelicu", Master's thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:168:944230

Metadata
TitleEstimacija sile vrha alata manipulatora pričvršćenog na bespilotnu letjelicu
Title (english)End effector force estimation for aerial robots
AuthorKrešimir Turković
MentorMatko Orsag (mentor)
Committee memberMatko Orsag (predsjednik povjerenstva)
Committee memberZdenko Kovačić (član povjerenstva)
Committee memberStjepan Bogdan (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2019-07-11, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
U ovom radu prikazana je i pobliže objašnjena izrada sustava za estimaciju sile robotskog manipulatora pričvršćenog na bespilotnu letjelicu. Za estimaciju sile pretpostavlja se veza između sile koja djeluje na vrhu alata manipulatora te promjene momenta u zglobovima manipulatora u odnosu na neopterećeni manipulator. Ova veza je predstavljena Newton-Eulerovim dinamičkim modelom i Jacobijevom matricom manipulatora. Newton-Eulerov model je također prikladan jer u sebi ima ugrađene formule za linijsku i kutnu brzinu i ubrzanje baze, koje prestaju biti konstantne kada se manipulator pričvrsti na letjelicu. Također, pobliže su objašnjeni problemi koji nastaju korištenjem ove metode. Estimacija je ispitana i provjerena na nekoliko eksperimenata stacionarnog manipulatora te manipulatora pričvršćenog na letjelicu. Estimacija je napisana u C++, komunikacija između estimacije i simulacije provodi se preko robotskog operacijskog sustava, a simulacija se provodi u Gazebo simulacijskom okruženju.
Abstract (english)
This paper presents a more detailed description of the end effector force estimation of a robotic manipulator attached to an unmanned aerial vehicle. For the force estimation it is assumed that there is a link between the force acting on the end effector and the change of the torques in the joints of the manipulator in relation to the unloaded manipulator. This link was presented with Newton-Euler’s dynamic model and the Jacobian matrix of the manipulator. The Newton-Euler’s model is also convenient because it has embedded formulas for linear and angular velocity and acceleration of the manipulator’s base, which ceases to be constant when the manipulator is attached to an aerial vehicle. Also, the problems which arise when using this method are explained more closely. The force estimation was tested and validated on several experiments of a stationary manipulator and a manipulator mounted on the aerial vehicle. Estimation is written in C++, communication between estimation and simulation uses robotic operating system for message exchange, and the simulation is performed in the Gazebo simulation environment.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:168:944230
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka elektrotehnike i informacijske tehnologije (magistar/magistra inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2020-01-07 22:46:08