prikaz prve stranice dokumenta Upravljanje modelom obradnog centra upotrebom programirljivog logičkog kontrolera i programskog jezika SCL
No public access
undergraduate thesis
Upravljanje modelom obradnog centra upotrebom programirljivog logičkog kontrolera i programskog jezika SCL
Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing, 2015. urn:nbn:hr:168:444572
Groš, Zvonimir
University of Zagreb
Faculty of Electrical Engineering and Computing

Institutional repository: FER Repository

Cite this document

Groš, Z. (2015). Upravljanje modelom obradnog centra upotrebom programirljivog logičkog kontrolera i programskog jezika SCL (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:444572

Groš, Zvonimir. "Upravljanje modelom obradnog centra upotrebom programirljivog logičkog kontrolera i programskog jezika SCL." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2015. https://urn.nsk.hr/urn:nbn:hr:168:444572

Groš, Zvonimir. "Upravljanje modelom obradnog centra upotrebom programirljivog logičkog kontrolera i programskog jezika SCL." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2015. https://urn.nsk.hr/urn:nbn:hr:168:444572

Groš, Z. (2015). 'Upravljanje modelom obradnog centra upotrebom programirljivog logičkog kontrolera i programskog jezika SCL', Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 25 December 2024, https://urn.nsk.hr/urn:nbn:hr:168:444572

Groš Z. Upravljanje modelom obradnog centra upotrebom programirljivog logičkog kontrolera i programskog jezika SCL [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2015 [cited 2024 December 25] Available at: https://urn.nsk.hr/urn:nbn:hr:168:444572

Z. Groš, "Upravljanje modelom obradnog centra upotrebom programirljivog logičkog kontrolera i programskog jezika SCL", Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2015. Available at: https://urn.nsk.hr/urn:nbn:hr:168:444572

Metadata
TitleUpravljanje modelom obradnog centra upotrebom programirljivog logičkog kontrolera i programskog jezika SCL
Title (english)Control of machining center model using programmable logic controller and programming language SCL
AuthorZvonimir Groš
MentorDamir Sumina (mentor)
Committee memberDamir Sumina (predsjednik povjerenstva)
Committee memberIgor Erceg (član povjerenstva)
Committee memberŠandor Ileš (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2015-07-13, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
U završnom radu je obrađena tema iz područja industrijske automatizacije, odnosno upravljanje modelom obradnog centra pomoću grafičkog sučelja. Model obradnog centra zapravo predstavlja dio jednog tipičnog industrijskog pogona koji se sastoji od pokretnih traka, glodalice, bušilice, pokretnih rampi, te od brojnih senzora (optičkih i kontaktnih). Za samo upravljanje ovog modela kao i za izradu HMI sučelja je korišten Siemens SIMATIC S7-1200 PLC i programski alat TIA Portal. Utjecaj automatizacije u svijetu je danas ogroman, te je jedan od njezinih glavnih ciljeva osiguranje što bržih, kvalitetnijih i pouzdanijih proizvodnih procesa. Temeljni uređaji za ostvarivanje tog cilja su upravo programirljivi logički kontroleri (PLC-i). U sklopu ovog završnog rada je dan uvid u područje industrijske automatizacije, korištenu sklopovsku konfiguraciju i programsku podršku, te samu realizaciju teme završnog rada.
Abstract (english)
This bachelor's thesis is about the field of industrial automation. The theme of the thesis is the control of machining center model using graphic interface. This machining center model actually replicates one part of the typical industrial plant. Conveyor belts, milling cutter, drill, moving ramps and lots of sensors (optical and contact) are all part of this machining center model. Siemens SIMATIC S7-1200 PLC and TIA Portal software are used for the control of machining center model and for developing the HMI panel. Nowadays, the influence of the automation is huge in the world. The goals of the automation are to reduce costs, improve quality and safety, and develop faster manufacturing processes. The instrumental part in achieving all this goals are programmable logic controllers (PLCs). This thesis gives a closer look in the field of industrial automation, hardware and software used in this project and as well the programming solution to the problem of the thesis.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:168:444572
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2018-02-06 09:03:17