prikaz prve stranice dokumenta Automatizacija modela okretnog stola upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku GRAPH
No public access
undergraduate thesis
Automatizacija modela okretnog stola upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku GRAPH
Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing, 2020. urn:nbn:hr:168:518602
Križanović, Tomislav
University of Zagreb
Faculty of Electrical Engineering and Computing

Institutional repository: FER Repository

Cite this document

Križanović, T. (2020). Automatizacija modela okretnog stola upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku GRAPH (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:518602

Križanović, Tomislav. "Automatizacija modela okretnog stola upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku GRAPH." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2020. https://urn.nsk.hr/urn:nbn:hr:168:518602

Križanović, Tomislav. "Automatizacija modela okretnog stola upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku GRAPH." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2020. https://urn.nsk.hr/urn:nbn:hr:168:518602

Križanović, T. (2020). 'Automatizacija modela okretnog stola upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku GRAPH', Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 14 November 2024, https://urn.nsk.hr/urn:nbn:hr:168:518602

Križanović T. Automatizacija modela okretnog stola upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku GRAPH [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2020 [cited 2024 November 14] Available at: https://urn.nsk.hr/urn:nbn:hr:168:518602

T. Križanović, "Automatizacija modela okretnog stola upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku GRAPH", Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:168:518602

Metadata
TitleAutomatizacija modela okretnog stola upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku GRAPH
Title (english)Automation of rotary table using programmable logic controller S7-1500 in programming language GRAPH
AuthorTomislav Križanović
MentorDamir Sumina (mentor)
Committee memberDamir Sumina (predsjednik povjerenstva)
Committee memberFilip Jukić (član povjerenstva)
Committee memberLuka Pravica (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2020-07-03, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
Ovaj rad se bavi problemom automatizacije modela okretnog stola proizvođača Fischertechnik upotrebom programirljivog logičkog kontrolera S7-1500. Program za upravljanje razvijen je u programskom paketu TIA Portal te je napisan u programskom jeziku GRAPH. Definirani su svi koraci sekvencijskog rada sustava te uvjeti prelaska iz trenutnog u sljedeći korak. U programskom paketu WinCC razvijeno je vizualizacijsko sučelje pomoću kojega je moguće nadgledati i upravljati sustavom. Implementirane su mogućnosti ručnog načina i automatskog načina rada. U automatskom načinu podržano je slijedno obrađivanje predmeta. Funkcionalnost razvijenog programa eksperimentalno je potvrđena četirima simulacijama upotrebom alata za simuliranje rada PLC-a S7-PLCSIM.
Abstract (english)
This paper deals with the problem of automating the rotary table model manufactured by Fischertechnik using programmable logic controller S7-1500. The program for the control of the system was developed using TIA Portal and written in programming language GRAPH. All steps of sequential controll as well as transitions from current step to the next were defined. Human-machine interface by which is possible to control and supervise the system was developed using software package WinCC. Both manual and automatic control options are implemented. Sequential processing of objects is possible while in automatic mode. Funcionality of developed algorithm was tested and confirmed by running four simulations which were performed by using S7-PLCSIM, software for simulating PLCs.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:168:518602
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2023-01-14 09:12:26