prikaz prve stranice dokumenta Automatizacija modela industrijskog postrojenja za obradu proizvoda upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku GRAPH
No public access
undergraduate thesis
Automatizacija modela industrijskog postrojenja za obradu proizvoda upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku GRAPH
Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing, 2021. urn:nbn:hr:168:319725
Luštica, Marin
University of Zagreb
Faculty of Electrical Engineering and Computing

Institutional repository: FER Repository

Cite this document

Luštica, M. (2021). Automatizacija modela industrijskog postrojenja za obradu proizvoda upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku GRAPH (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing. Retrieved from https://urn.nsk.hr/urn:nbn:hr:168:319725

Luštica, Marin. "Automatizacija modela industrijskog postrojenja za obradu proizvoda upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku GRAPH." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2021. https://urn.nsk.hr/urn:nbn:hr:168:319725

Luštica, Marin. "Automatizacija modela industrijskog postrojenja za obradu proizvoda upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku GRAPH." Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, 2021. https://urn.nsk.hr/urn:nbn:hr:168:319725

Luštica, M. (2021). 'Automatizacija modela industrijskog postrojenja za obradu proizvoda upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku GRAPH', Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, accessed 26 November 2024, https://urn.nsk.hr/urn:nbn:hr:168:319725

Luštica M. Automatizacija modela industrijskog postrojenja za obradu proizvoda upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku GRAPH [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Electrical Engineering and Computing; 2021 [cited 2024 November 26] Available at: https://urn.nsk.hr/urn:nbn:hr:168:319725

M. Luštica, "Automatizacija modela industrijskog postrojenja za obradu proizvoda upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku GRAPH", Undergraduate thesis, University of Zagreb, Faculty of Electrical Engineering and Computing, Zagreb, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:168:319725

Metadata
TitleAutomatizacija modela industrijskog postrojenja za obradu proizvoda upotrebom programirljivog logičkog kontrolera S7-1500 u programskom jeziku GRAPH
Title (english)Automation of industrial plant model for product processing using programmable logic controller S7-1500 in programming language GRAPH
AuthorMarin Luštica
MentorDamir Sumina (mentor)
Committee memberDamir Sumina (predsjednik povjerenstva)
Committee memberIgor Erceg (član povjerenstva)
Committee memberMartina Kutija (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Electrical Engineering and Computing
Zagreb
Defense date and country2021-09-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Abstract
Programirljivi logički kontroleri su neizostavni dijelovi sustava automatizacije. Cilj ovog rada je automatizacija postrojenja koje se bavi obradom predmeta. Sustav je izveden u obliku virtualnog postrojenja koji je modeliran u software-u Factory I/O. Njime se upravlja iz simulatora PLCSIM-a koji je sastavni dio TIA portala. TIA portal je također korišten za pisanje programskog koda i opis rada PLC-a. Programsko rješenje je izvedeno u LAD dijagramu i u GRAPHU. LAD je bio prvi programski jezik za programiranje PLC, te je sam kod nalik na relejne sheme koje su nekad upravljale automatiziranim postrojenjima. GRAPH je grafički sekvencijski jezik koji problem upravljanja razbija u niz koraka, koji se neprestano ponavljaju. Uočljive su razlike između rješenja, te prednosti i nedostatci jednog jezika u odnosu na drugi.
Abstract (english)
Programmable logic controller is the most important part of the automation system today. The point of this thesis is the automation of the factory whose purpose is the production of the objects. Factory is virtually implemented in the software named Factory I/O. It is connected and controlled with the simulator PLCSIM from the automation software TIA Portal. TIA Portal is used to write program for PLC too. Program is implemented in two programming languages, LAD and GRAPH. LAD diagram was the first using programming language for PLCs, it is graphically similar to relay circuits which was technology to control automation systems before programmable logic controllers came out. GRAPH is graphical sequential programming language which divides program into sequence steps. The difference is seen between two languages and pros and cons one language in front of the other.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:168:319725
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Public note
Created on2023-01-14 21:02:03