prikaz prve stranice dokumenta Jednofazna aktivna korekcija faktora snage s uzlaznim istosmjernim pretvaračem
Access restricted to authenticated users
master's thesis
Jednofazna aktivna korekcija faktora snage s uzlaznim istosmjernim pretvaračem
Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:179:019503
Pavić, Drago
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Power Engineering

Institutional repository: Repository of the Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture

Cite this document

Pavić, D. (2022). Jednofazna aktivna korekcija faktora snage s uzlaznim istosmjernim pretvaračem (Master's thesis). Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:019503

Pavić, Drago. "Jednofazna aktivna korekcija faktora snage s uzlaznim istosmjernim pretvaračem." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:179:019503

Pavić, Drago. "Jednofazna aktivna korekcija faktora snage s uzlaznim istosmjernim pretvaračem." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:179:019503

Pavić, D. (2022). 'Jednofazna aktivna korekcija faktora snage s uzlaznim istosmjernim pretvaračem', Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 29 November 2024, https://urn.nsk.hr/urn:nbn:hr:179:019503

Pavić D. Jednofazna aktivna korekcija faktora snage s uzlaznim istosmjernim pretvaračem [Master's thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2022 [cited 2024 November 29] Available at: https://urn.nsk.hr/urn:nbn:hr:179:019503

D. Pavić, "Jednofazna aktivna korekcija faktora snage s uzlaznim istosmjernim pretvaračem", Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:179:019503

Metadata
TitleJednofazna aktivna korekcija faktora snage s uzlaznim istosmjernim pretvaračem
AuthorDrago Pavić
MentorDinko Vukadinović https://orcid.org/0000-0001-7796-4551 (mentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Power Engineering)
Split
Defense date and country2022-09-22, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Automation and Robotics
Abstract
U okviru ovog rada realiziran je simulacijski model za APFC. Primjenom lineariziranog modela napravljena je sinteza regulacijskog sustava jednofaznog diodnog ispravljača s uzlaznim pretvaračem na način da je prvo napravljen izbor i proračun parametara za APFC. Odabrani i izračunati parametri simulacije su sljedeći: frekvencija 50 Hz, sklopna frekvencija 100 kHz, ulazni napon 230 V, izlazni napon 400 V, izlazna snaga 1509 W, induktivitet zavojnice 0,8 mH i kapacitet kondenzatora 2,8 mF. Zatim je kreirana unutarnja, strujna regulacijska petlja za regulaciju struje zavojnice te vanjska, naponska regulacijska petlja za regulaciju izlaznog napona. Regulacija struje zavojnice izvršena je pomoću PI regulatora na način da fazna pričuva otvorene regulacijske petlje struje iznosi 45° na frekvenciji koja iznosi desetinu sklopne frekvencije. Regulacija izlaznog napona realizirana je također pomoću PI regulatora, jedina je razlika da fazna pričuva iznosi 45° na frekvenciji koja odgovara 1/10 amplitude drugog harmonika. Nadalje, pokrenuta je simulacija u programskom paketu MATLAB Simulink te su analizirane razne veličine kao što su: faktor snage, THD, valovitost struje zavojnice, valovitost izlaznog napona itd. Poslije toga je ispitana stabilnost sustava za slučaj promjene ulaznog napona u rasponu od 184 V do 276 V (±20 %), a potom je izvršena i analiza sustava s obzirom na različite vrijednosti otpora tereta u rasponu od 𝑅/2 do 2R. Naposljetku, napravljena je dinamička analiza sustava na skokovitu promjenu otpora trošila sa 106 Ω na 53 Ω.
Abstract (english)
Within this thesis, a simulation model for APFC was realized. By applying the linearized model, synthesis of the control system of a single-phase diode rectifier with the boost converter was made in a way that the selection and calculation of the parameters for APFC were done first. Selected and calculated simulation parameters for the APFC model are as follows: frequency 50 Hz, switching frequency 100 kHz, input voltage 230 V, output voltage 400 V, output power 1509 W, inductor 0,8 mH and capacitor 2,8 mF. Then the inner current control loop was designed to control the inductor current as well as the outer voltage control loop to control the output voltage. The inductor current was controlled using a PI controller in a way that the phase margin of the open current loop is 45° at the frequency equal to one tenth of the switching frequency. Control of the output voltage was also realized using a PI controller, the only difference is that the phase margin is 45° at the frequency that corresponds to the one tenth of the second harmonic amplitude. Furthermore, simulation of the model was run in the MATLAB Simulink software package and several quantities were analyzed, such as: power factor, THD, inductor current ripple, output voltage ripple etc. Afterwords, stability of the system was tested during the input voltage change over the range from 184 V to 276 V (±20 %), and then the system stability was tested with different load resistances over the range from 𝑅/2 do 2R. Finally, the model analysis was made for the rapid load resistance change from 106 Ω to 53 Ω.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:019503
Study programmeTitle: Electrical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka elektrotehnike (magistar/magistra inženjer/inženjerka elektrotehnike)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Created on2023-06-12 13:31:06