prikaz prve stranice dokumenta Tehnologija izrade odljevka postupkom preciznog lijevanja
Access restricted to authenticated users
undergraduate thesis
Tehnologija izrade odljevka postupkom preciznog lijevanja
Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:179:526079
Perković, Matea
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Mechanical Engineering Technology

Institutional repository: Repository of the Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture

Cite this document

Perković, M. (2022). Tehnologija izrade odljevka postupkom preciznog lijevanja (Undergraduate thesis). Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:526079

Perković, Matea. "Tehnologija izrade odljevka postupkom preciznog lijevanja." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:179:526079

Perković, Matea. "Tehnologija izrade odljevka postupkom preciznog lijevanja." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:179:526079

Perković, M. (2022). 'Tehnologija izrade odljevka postupkom preciznog lijevanja', Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 12 September 2024, https://urn.nsk.hr/urn:nbn:hr:179:526079

Perković M. Tehnologija izrade odljevka postupkom preciznog lijevanja [Undergraduate thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2022 [cited 2024 September 12] Available at: https://urn.nsk.hr/urn:nbn:hr:179:526079

M. Perković, "Tehnologija izrade odljevka postupkom preciznog lijevanja", Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:179:526079

Metadata
TitleTehnologija izrade odljevka postupkom preciznog lijevanja
Title (english)Technology of casting by investment casting procedure
AuthorMatea Perković
MentorSonja Jozić https://orcid.org/0000-0002-7570-5799 (mentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Mechanical Engineering Technology)
Split
Defense date and country2022-07-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu pod nazivom „Tehnologija izrade odljevka preciznim lijevanjem“ obrađen je cjelokupan postupak koji se primjenjuje u ljevaonicama koje su specijalizirane za proces preciznog lijevanja. U radu je dan osvrt na proces lijevanja te primjena preciznog lijeva do današnjih dana. Posebno su naglašene prednosti kao što su ekonomičnost, smanjenje troškova, točnost izrađenih dijelova i kvaliteta površine odljevka. U edukativne svrhe izrađena je kalupna šupljina na osnovu prethodno pripremljenog voštanog modela. Opisan je kompletan postupak, od izrade modela do ulijevanja u kalupnu šupljinu. Također, na osnovu očišćenog odljevka utvrđene su nepravilnosti i nedostatci koji će se u budućnosti eliminirati kvalitenijim vezivnim sredstvom.
Abstract (english)
The thesis topic is focused on the casting technology by investment casting procedure. The entire procedure applied in foundries will be described. This paper gives an overview of the casting process and the application of investment cast used nowadays. There are many advantages in areas like economy, cost reduction, the accuracy and quality of casted parts. For educational purposes, the production of mold cavities was done on the basis of the previously prepared wax model. The complete procedure is described, from making the model to pouring the molten metal into the mold cavity. Also, on the basis of the cleaned casting, irregularities and defects were determined, which will be eliminated in the future with a better quality binder.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:526079
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: Stručni/Stručna prvostupnik/prvostupnica (baccalaureus/ baccalaurea) inženjer/inženjerka strojarstva (Stručni/Stručna prvostupnik/prvostupnica (baccalaureus/ baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Created on2023-06-14 09:03:09