prikaz prve stranice dokumenta Sustav hlađenja AFPM motora
Access restricted to authenticated users
undergraduate thesis
Sustav hlađenja AFPM motora
Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:179:964015
Poljak, Jure
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of the Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture

Cite this document

Poljak, J. (2022). Sustav hlađenja AFPM motora (Undergraduate thesis). Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:964015

Poljak, Jure. "Sustav hlađenja AFPM motora." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:179:964015

Poljak, Jure. "Sustav hlađenja AFPM motora." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:179:964015

Poljak, J. (2022). 'Sustav hlađenja AFPM motora', Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 04 August 2024, https://urn.nsk.hr/urn:nbn:hr:179:964015

Poljak J. Sustav hlađenja AFPM motora [Undergraduate thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2022 [cited 2024 August 04] Available at: https://urn.nsk.hr/urn:nbn:hr:179:964015

J. Poljak, "Sustav hlađenja AFPM motora", Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:179:964015

Metadata
TitleSustav hlađenja AFPM motora
Title (english)Cooling of AFPM motors
AuthorJure Poljak
MentorIvan Tolj https://orcid.org/0000-0002-6209-2022 (mentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Mechanical Engineering and Naval Architecture)
Split
Defense date and country2022-09-09, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U završnom radu pod nazivom “Hlađenje AFPM motora” obrađen je cjelokupan postupak koji se primjenjuje prilikom projektiranja hlađenja bilo kojeg stroja. U radu je dan osvrt na sve postupke koji su trebali biti detaljno shvaćeni i primijenjeni. Posebno se pazilo da gubici budu izračunati za najnepovoljniju moguću situaciju, kako bi se rizik otkazivanja bilo kojeg elementa uslijed pregrijavanja doveo na minimum. Najvažnije stvar bila je osigurati magnete i namote statora. Ta dva elementa su podložna kvaru jer imaju nizak prag tolerancije na temperaturu. Na osnovu rezultata i provedenih istraživanja projekt ispunjava zadane kriterije, a utvrđeni nedostatci bit će eliminirani korištenjem materijala veće toplinske vodljivosti.
Abstract (english)
In this thesis entitled "Cooling of AFPM motors" the entire procedure for designing the cooling of any electric machine is covered. The paper provides an overview of all procedures that should have been thoroughly understood and applied. Special care was taken to calculate the losses for the worst possible situation, in order to minimize the risk of failure of any element due to overheating. The most important thing was to secure the magnets and stator windings. Those two elements are susceptible to failure because they have a low temperature tolerance threshold. Based on the results and conducted research, the project meets the given criteria, and the identified deficiencies will be eliminated by using materials with higher thermal conductivity.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:964015
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: Stručni/Stručna prvostupnik/prvostupnica (baccalaureus/ baccalaurea) inženjer/inženjerka strojarstva (Stručni/Stručna prvostupnik/prvostupnica (baccalaureus/ baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Created on2023-06-15 11:44:34