prikaz prve stranice dokumenta Statička analiza jarbola jedrenjaka
Access restricted to authenticated users
master's thesis
Statička analiza jarbola jedrenjaka
Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:179:299690
Radačić, Marin
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of the Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture

Cite this document

Radačić, M. (2022). Statička analiza jarbola jedrenjaka (Master's thesis). Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:299690

Radačić, Marin. "Statička analiza jarbola jedrenjaka." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:179:299690

Radačić, Marin. "Statička analiza jarbola jedrenjaka." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:179:299690

Radačić, M. (2022). 'Statička analiza jarbola jedrenjaka', Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 04 November 2024, https://urn.nsk.hr/urn:nbn:hr:179:299690

Radačić M. Statička analiza jarbola jedrenjaka [Master's thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2022 [cited 2024 November 04] Available at: https://urn.nsk.hr/urn:nbn:hr:179:299690

M. Radačić, "Statička analiza jarbola jedrenjaka", Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:179:299690

Metadata
TitleStatička analiza jarbola jedrenjaka
AuthorMarin Radačić
MentorBranko Klarin https://orcid.org/0000-0002-9735-5128 (mentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Mechanical Engineering and Naval Architecture)
Split
Defense date and country2022-09-21, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
U ovom radu je izvršena statička analiza jarbola dostavljena od strane konstruktora u programskom paketu ANSYS Mechanical. Jarbol s dobivenim dimenzijama kao ulaznim parametrima prikazan je u nacrtu, tlocrtu i bokocrtu. Prikazano je naprezanje jarbola i oputa kod prednaprezanju pri normalnim uvjetima plovidbe u tri različita smjera, a to su: plovidba prema vjetru, bočno od vjetra te niz vjetar. Nakon dobivenih rezultata pristupilo se uspoređivanju istih. Uzima se u obzir i bowsprit te njegov utjecaj na naprezanje i deformaciju prednjeg jarbola jedrenjaka pri normalnim uvjetima plovidbe. Dobiveni rezultati daju uvid u ponašanje jarbola te omogućuju daljnji napredak projekta.
Abstract (english)
In this paper, a static analysis of the mast provided by the constructor in the ANSYS software package was performed. The mast with the obtained dimensions as input parameters is shown in the plan, floor plan and side plan. The tension of the mast and rigging during prestressing under normal sailing conditions is shown in three different directions, namely: sailing upwind, sideways from the wind and downwind. After the results were obtained, they were compared. The bowsprit is also taken into account and its influence on the stress and deformation of the fore mast of the sailboat under normal sailing conditions. The obtained results give an insight into the behavior of the mast and enable further progress of the project.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:299690
Study programmeTitle: Mechanical Engineering; specializations in: Structures and Energy Technology, Computer Aided Design and Engineering, Production Mechanical Engineering
Course: Structures and Energy Technology
Study programme type: university
Study level: graduate
Academic / professional title: Magistar/magistra inženjer/inženjerka strojarstva (Magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Created on2023-06-16 08:25:19