prikaz prve stranice dokumenta Fazno upravljani ispravljač
Access restricted to students and staff of home institution
undergraduate thesis
Fazno upravljani ispravljač
Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. urn:nbn:hr:179:250614
Ninčević, Josip
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Electronics and Computing

Institutional repository: Repository of the Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture

Cite this document

Ninčević, J. (2021). Fazno upravljani ispravljač (Undergraduate thesis). Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:250614

Ninčević, Josip. "Fazno upravljani ispravljač." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:250614

Ninčević, Josip. "Fazno upravljani ispravljač." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:250614

Ninčević, J. (2021). 'Fazno upravljani ispravljač', Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 04 October 2024, https://urn.nsk.hr/urn:nbn:hr:179:250614

Ninčević J. Fazno upravljani ispravljač [Undergraduate thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2021 [cited 2024 October 04] Available at: https://urn.nsk.hr/urn:nbn:hr:179:250614

J. Ninčević, "Fazno upravljani ispravljač", Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:179:250614

Metadata
TitleFazno upravljani ispravljač
Title (english)Phase controlled rectifiers
AuthorJosip Ninčević
MentorIvan Marasović (mentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Electronics and Computing)
Split
Defense date and country2021-09-22, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Electrical Engineering
Electronics
Abstract
Analiziranjem mosnog diodnog spoja zaključuje se da sklop ispravlja punovalno ispravlja ulazni signal a rezultirani signal je dvostruko manjeg perioda od ulaznog signala i dvostruko veće frekvencije. Kod mosnog spoja sa samim omskim otporom dobiva se ispravljeni izlazni signal međutim takav oblik izlaznog signala je nepoželjan. Ako se želi postići sklop sa boljim faktorom snage potrebno je paraleleno sa omskim trošilom spojiti kondenzator koji će izgladiti signal i povećati faktor snage. Fazno upravljivi sklopovi izlaznim signalom upravljaju pomoćnim strujnim impulsom koji se dovodi na vrata SCR-a. Ovisno o kutu α strujnog impulsa na izlazu se dobivaju različiti naponski oblici. Teoretska analiza pokazuje da se za kut α = 0 na izlazu dobiva maksimalna srednja vrijednost napona. Važno je naglasiti da u strujne krugove koji uključuju induktivna trošila treba dodati filtere signala kako bi se eliminirala neizbježna pojava viših harmonika.
Abstract (english)
Results of bridge diode rectifier analisys show that the effects of single phase full wave rectification on the output voltage are as follows: output voltage has its frequency doubled and period halved compared to input voltage. Different circuit loads yield different output voltages, while bridge rectifier with R load offers DC signal its waveform is far from useful in real life applications. Reason behind this is low power factor value which results with high energy losses in the circuit. Solution for this problem is addition of filter capacitors that smooth out the output signal and increase value of power factor. Phase controlled rectifiers are the next improvement from the diode bridge rectifier because the use of SCR allows control of the output signal. Output signal varies depending on the value of the delay angle α. Maximum value of average output signal is achieved when α=0°. Lastly, it is important to emphasize the effect that inductive loads have on rectifier circuits. Inductive loads generate harmonics both in supply system as well as in load circuits so adding filters is inevitable.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:250614
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-12-09 08:25:44