prikaz prve stranice dokumenta Generator trokutastog signala
Access restricted to students and staff of home institution
undergraduate thesis
Generator trokutastog signala
Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. urn:nbn:hr:179:203798
Rudan, Bruno
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Electronics and Computing

Institutional repository: Repository of the Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture

Cite this document

Rudan, B. (2021). Generator trokutastog signala (Undergraduate thesis). Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:203798

Rudan, Bruno. "Generator trokutastog signala." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:203798

Rudan, Bruno. "Generator trokutastog signala." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:203798

Rudan, B. (2021). 'Generator trokutastog signala', Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 08 November 2024, https://urn.nsk.hr/urn:nbn:hr:179:203798

Rudan B. Generator trokutastog signala [Undergraduate thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2021 [cited 2024 November 08] Available at: https://urn.nsk.hr/urn:nbn:hr:179:203798

B. Rudan, "Generator trokutastog signala", Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:179:203798

Metadata
TitleGenerator trokutastog signala
Title (english)Triangle wave generator
AuthorBruno Rudan
MentorVladan Papić (mentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Electronics and Computing)
Split
Defense date and country2021-09-13, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Basic Technical Sciences
Automatics
Abstract
Zadatak u ovom radu je bila izrada generatora trokutastog signala kao fizičkog sklopa na tiskanoj pločici, izrada simulacije sklopa u Multisim programskom paketu te konačno usporedba rada sklopa generatora na tiskanoj pločici i njegove simulacije. Generator je izveden pomoću dva kruga s operacijskim pojačalima. Sklop dakle možemo koncipirati kao dva manja sklopa, komparatora i integratora. Princip rada generatora je sljedeći. Sinusni signal se dovodi na ulaz komparatora te se pri prolasku kroz komparator pretvara u pravokutni. Zatim se pravokutni signal na izlazu iz kruga komparatora prolaskom kroz integrator konačno pretvara u trokutasti. Zadatak možemo koncipirati i u užem smislu kao zadatak projektiranja dvaju sklopova. Započinjući s teorijskom razradom tih dvaju krugova u idealnim uvjetima dobiva se njihovo očekivano ponašanje. Odabirom komponenata kojom će se oni izvesti sklop se kao cijelina počinje razvijati na tiskanoj pločici gdje se konačno može ispitati njegova vjernost teorijskim razmatranjima i simulaciji.
Abstract (english)
The task in this paper was to make a triangular wave generator as a physical circuit on a printed circuit board, to make a circuit simulation in the Multisim software package and finally to compare the operation of the generator and its simulation. The generator is made using two circuits with operational amplifiers. The circuit can therefore be conceived of as two smaller circuits, a comparator and an integrator. The working principle of the generator is as follows. The sinusoidal signal is fed to the comparator input and is converted to rectangular signal when passing through the comparator. Then the rectangular signal at the output of the comparator circuit is by passing through the integrator circuit finally converted into a triangular one. We can conceptualize the task in a narrower sense as a task of designing two circuits. Starting with the theoretical understanding and solving of these two circuits in ideal conditions, their expected behavior is obtained. By selecting the components with which they will be assembled, the circuit as a whole begins to develop on the printed circuit board, where its fidelity to theoretical considerations and to the simulation can finally be tested.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:203798
Study programmeTitle: Electrical Engineering and Information Technology
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka elektrotehnike i informacijske tehnologije)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-12-09 11:38:07