prikaz prve stranice dokumenta Sustav za automatsko upravljanje vitlom kod sidrenja brodova pomoću PLC uređaja i HMI sučelja
Access restricted to authenticated users
master's thesis
Sustav za automatsko upravljanje vitlom kod sidrenja brodova pomoću PLC uređaja i HMI sučelja
Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. urn:nbn:hr:179:482590
Golemac, Ivan Mislav
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Electronics and Computing

Institutional repository: Repository of the Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture

Cite this document

Golemac, I. M. (2021). Sustav za automatsko upravljanje vitlom kod sidrenja brodova pomoću PLC uređaja i HMI sučelja (Master's thesis). Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:482590

Golemac, Ivan Mislav. "Sustav za automatsko upravljanje vitlom kod sidrenja brodova pomoću PLC uređaja i HMI sučelja." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:482590

Golemac, Ivan Mislav. "Sustav za automatsko upravljanje vitlom kod sidrenja brodova pomoću PLC uređaja i HMI sučelja." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:482590

Golemac, I. M. (2021). 'Sustav za automatsko upravljanje vitlom kod sidrenja brodova pomoću PLC uređaja i HMI sučelja', Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 23 November 2024, https://urn.nsk.hr/urn:nbn:hr:179:482590

Golemac IM. Sustav za automatsko upravljanje vitlom kod sidrenja brodova pomoću PLC uređaja i HMI sučelja [Master's thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2021 [cited 2024 November 23] Available at: https://urn.nsk.hr/urn:nbn:hr:179:482590

I. M. Golemac, "Sustav za automatsko upravljanje vitlom kod sidrenja brodova pomoću PLC uređaja i HMI sučelja", Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:179:482590

Metadata
TitleSustav za automatsko upravljanje vitlom kod sidrenja brodova pomoću PLC uređaja i HMI sučelja
Title (english)System for automatic winch control when anchoring boats using PLC device and human - machine interface
AuthorIvan Mislav Golemac
MentorTamara Grujić (mentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Electronics and Computing)
Split
Defense date and country2021-09-03, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Basic Technical Sciences
Automatics
Abstract
Cilj ovog rada je razvoj odnosno unaprjeđenje sustava za obaranje i podizanje sidra/lanca pomoću brodskog vitla. U uvodnom dijelu rada opisan je PLC uređaj sa svojim funkcionalnostima, te HMI uređaj i njegova uporaba danas. U praktičnom dijelu rada unaprijeđen je model upravljanja vitlom na koji se namata lanac kojim se podiže ili spušta sidro broda, pomoću PLC i HMI uređaja. Praktični dio rada izrađen je u suradnji s tvrtkom Adria Winch d. o. o. Korišten je PLC uređaj naziva TM241CEC24T/U tvrtke Schneider Electric. Programski kod za PLC uređaj napisan je u SoMachine programu. Korišten je HMI uređaj naziva HMIS5T, a programski kod za upravljanje HMI uređajem napisan je u Vijeo Designer programskom okružju. U sklopu praktičnog rada realiziran je programski kod koji služi za povezivanje HMI panela, PLC uređaja i elektro ormara. U elektro ormaru se nalazi frekvencijski pretvarač na koji se šalje naponski signal preko analognog izlaza PLC uređaja pomoću kojeg upravljamo brzinom elektromotora. Preko HMI panela korisnik / operater definira vrijednost brzine vrtnje motora, koja se potom šalje motoru. Srednju brzina motora je unaprijed zadana, dok se pomoću opcije Ubrzaj može povećavati brzina vrtnje motora. Na motoru se nalaze reperi kojima se, pomoću indukcijskih senzora, mjere brzina i dužina lanca, i ti se podaci prikazuju korisniku na ekranu HMI uređaja. Preko digitalnih izlaza PLC uređaja korisniku se omogućuje paljenje i gašenje motora preko gumbova koji se nalaze na HMI panelu. Korisniku je sve vrlo pregledno prikazano na HMI uređaju, te korisnik, osim ubrzavanja i paljenja motora, ima mogućnost resetiranja svih vrijednosti. Sve greške koje su se dogodile tijekom rada ispisuju se na panelu, te u svakom trenutku korisnik ima mogućnost promjene moda rada. Također, ako želi, može odabrati automatski način rada na način da samo pokrene motor i prepusti sve programu. U konačnici, realiziran je sustav za automatsko upravljanje vitlom, vrlo jednostavan i pregledan za uporabu.
Abstract (english)
The aim of this thesis is to develop or improve the system for lowering and raising the anchor/chain using a ship's winch. The introductory part of the paper describes the PLC device with its functionalities, and the HMI device and its use today. In the practical part of the work, the model of winch control was improved, on which a chain is wound which raises or lowers the ship's anchor, using PLC and HMI devices. The practical part of the work was made in collaboration with Adria Winch d. O. O. A PLC device called TM241CEC24T/U from Schneider Electric was used. The program code for the PLC device is written in the SoMachine program. An HMI device called HMIS5T was used, and the program code for managing the HMI device was written in the Vijeo Designer programming environment. As part of the practical work, a program code was realized that is used to connect HMI panels, PLC devices and electrical cabinets. In the electrical cabinet there is a frequency converter to which a voltage signal is sent via the analog output of the PLC device by which we control the speed of the electric motor. Through the HMI panel, the user / operator defines the value of the motor speed, which is then sent to the motor. The average engine speed is preset, while the Acceleration option can be used to increase the engine speed. There are benchmarks on the motor that measure the speed and length of the chain using induction sensors, and this information is displayed to the user on the screen of the HMI device. Via the digital outputs of the PLC device, the user is enabled to turn on and off the motor via the buttons located on the HMI panel. The user is shown everything very clearly on the HMI device, and the user, in addition to accelerating and starting the engine, has ability to reset all values. All errors that occurred during operation are printed on the panel, and at any time the user has opportunity to change the operating mode. Also, if he wants, he can select the automatic mode by just starting the engine and leaving everything to the program. Ultimately, an automatic winch control system was implemented, very simple and easy to use.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:482590
Study programmeTitle: Systems and Control
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka automatike i sustava (magistar/magistra inženjer/inženjerka automatike i sustava)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Public notePraktični dio rada je izrađen u suradnji s tvrtkom Adria Winch d.o.o.
Created on2021-11-23 12:08:40