prikaz prve stranice dokumenta CFD analiza vodne turbine
Access restricted to authenticated users
master's thesis
CFD analiza vodne turbine
Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. urn:nbn:hr:179:974771
Vranković, Rino
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of the Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture

Cite this document

Vranković, R. (2021). CFD analiza vodne turbine (Master's thesis). Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:974771

Vranković, Rino. "CFD analiza vodne turbine." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:974771

Vranković, Rino. "CFD analiza vodne turbine." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:974771

Vranković, R. (2021). 'CFD analiza vodne turbine', Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 27 December 2024, https://urn.nsk.hr/urn:nbn:hr:179:974771

Vranković R. CFD analiza vodne turbine [Master's thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2021 [cited 2024 December 27] Available at: https://urn.nsk.hr/urn:nbn:hr:179:974771

R. Vranković, "CFD analiza vodne turbine", Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:179:974771

Metadata
TitleCFD analiza vodne turbine
AuthorRino Vranković
MentorIgor Pehnec https://orcid.org/0000-0002-7435-6654 (mentor)
MentorMarija Šiško Kuliš (komentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Mechanical Engineering and Naval Architecture)
Split
Defense date and country2021-09-17, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Rad se bavi modeliranjem i numeričkom analizom toka vode unutar Francis turbina A i B hidroelektrane Zakučac prije revitalizacije, odnosno turbinama koje su zamijenjene 2012. godine. Na temelju dobivenih 2D nacrta vršilo se dimenzioniranje svih dijelova Francis turbine osim lopatica rotora u programu „Design modeler“ koji je sastavni dio programskog paketa „Ansys“. Navedene lopatice rotora su zbog svoje dvostruke zakrivljenosti mjerene pomoću 3D skenera, te su preko programa „Rhino“ unesene u program „Design modeler“ i pridružene ostalim dijelovima modeliranog toka vode. Nakon dimenzioniranja toka vode unutar Francis turbine, pristupilo se generiranju mreže konačnih volumena čija kvaliteta je direktno povezana s kvalitetom dobivenih rezultata. Na temelju kvalitetne generirane mreže konačnih volumena pristupa se postavljanju parametara za numeričku analizu u kojima se definira materijal, model strujanja, definiranje mirujućeg i rotirajućeg dijela. U ovom radu su prikazane numeričke analize za realistični K-ε model strujanja. Posljednji dio rada je posvećen prikazu dobivenih rezultata kao i usporedbom s dobivenim rezultatima.
Abstract (english)
This work is about designing and numeral analysis of water flow inside the Francis turbines A and B of Zakučac hydro power plant, before revitalisation, that is turbines that have been replaced in 2012. Based on 2D draft given, sizing of all parts of the Francis turbines except rotor blades, have been made in the program "Design modeler" which is an integral part of program package "Ansys". Due to their double curvature, rotor blades were measured with 3D scanner, and through "Rhino" software introduced to "Design modeler" and attached to other parts of modular water flow. After sizing the water flow inside the Francis turbine, generating of network of finite volume had been made, which quality is directly connected to quality of the results given. Based on quality generated network of finite volume, it was approached to setting parameters for numeral analysis in which material is defined, model of flow, and static and rotating part were defined. This work presented numeral analysis for realisable K-ε turbulence model. The last part of the work is dedicated to display of the results given, and also comparison to the given results.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:974771
Study programmeTitle: Mechanical Engineering; specializations in: Structures and Energy Technology, Computer Aided Design and Engineering, Production Mechanical Engineering
Course: Computer Aided Design and Engineering
Study programme type: university
Study level: graduate
Academic / professional title: Magistar/magistra inženjer/inženjerka strojarstva (Magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Public noteRad izrađen u suradnji s HEP ODS d.o.o.
Created on2022-11-09 12:12:06