prikaz prve stranice dokumenta CFD analiza Darrieus vjetroturbine
Access restricted to authenticated users
master's thesis
CFD analiza Darrieus vjetroturbine
Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. urn:nbn:hr:179:228266
Vukasović, Luka
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of the Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture

Cite this document

Vukasović, L. (2021). CFD analiza Darrieus vjetroturbine (Master's thesis). Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:228266

Vukasović, Luka. "CFD analiza Darrieus vjetroturbine." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:228266

Vukasović, Luka. "CFD analiza Darrieus vjetroturbine." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:228266

Vukasović, L. (2021). 'CFD analiza Darrieus vjetroturbine', Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 03 January 2025, https://urn.nsk.hr/urn:nbn:hr:179:228266

Vukasović L. CFD analiza Darrieus vjetroturbine [Master's thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2021 [cited 2025 January 03] Available at: https://urn.nsk.hr/urn:nbn:hr:179:228266

L. Vukasović, "CFD analiza Darrieus vjetroturbine", Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:179:228266

Metadata
TitleCFD analiza Darrieus vjetroturbine
AuthorLuka Vukasović
MentorBranko Klarin (mentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Mechanical Engineering and Naval Architecture)
Split
Defense date and country2021-09-22, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
General Mechanical Engineering (Construction)
Abstract
U ovom radu provedena je 2D CFD analiza Darrieus vjetroturbine s 3 lopatice. Za analizu je korišten programski paket ANSYS Fluent. Unutar njega je izrađen model vjetroturbine sa simetričnim i asimetričnim oblikom aeroprofila. Svi parametri simulacije definirani su u skladu s dostupnom literaturom kako bi se osigurala što veća točnost rezultata. Provedeno je ispitivanje neovisnosti rezultata o mreži konačnih volumena. Pri simulaciji je korišten kω SST model turbulencije. U oba slučaja je provedeno više simulacija u kojima se mijenjala brzina nastrujavanja vjetra kao i broj okretaja vjetroturbine iz čega su se zatim dobili dijagrami snage. Nakon provedenih simulacija uspoređeni su rezultati za oba oblika aeroprofila.
Abstract (english)
In this thesis, a 2D CFD analysis of a Darrieus 3-bladed wind turbine was performed. ANSYS Fluent software package was used for analysis. Inside it, a model of a wind turbine with symmetrical and asymmetrical airfoil shape was made. All simulation parameters were defined according to the available literature to ensure the highest possible accuracy of the results. A grid independence study was performed. The k-ω SST turbulence model was used in the simulation. In both cases, several simulations were performed in which the wind speed as well as the number of revolutions of the wind turbine were varied, from which power diagrams were then obtained. After the simulations were finished, the results for both turbine configurations were compared.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:228266
Study programmeTitle: Mechanical Engineering; specializations in: Structures and Energy Technology, Computer Aided Design and Engineering, Production Mechanical Engineering
Course: Structures and Energy Technology
Study programme type: university
Study level: graduate
Academic / professional title: Magistar/magistra inženjer/inženjerka strojarstva (Magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Created on2022-11-09 12:19:18