prikaz prve stranice dokumenta Development of a template for the fill and charging systems in the early concept phase with the CAD system CATIA V5
Embargo period 2026-12-11
master's thesis
Development of a template for the fill and charging systems in the early concept phase with the CAD system CATIA V5
Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. urn:nbn:hr:179:421434
Bošnjak, Mario
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Mechanical Engineering Technology

Institutional repository: Repository of the Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture

Cite this document

Bošnjak, M. (2021). Development of a template for the fill and charging systems in the early concept phase with the CAD system CATIA V5 (Master's thesis). Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:421434

Bošnjak, Mario. "Development of a template for the fill and charging systems in the early concept phase with the CAD system CATIA V5." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:421434

Bošnjak, Mario. "Development of a template for the fill and charging systems in the early concept phase with the CAD system CATIA V5." Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2021. https://urn.nsk.hr/urn:nbn:hr:179:421434

Bošnjak, M. (2021). 'Development of a template for the fill and charging systems in the early concept phase with the CAD system CATIA V5', Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 12 September 2024, https://urn.nsk.hr/urn:nbn:hr:179:421434

Bošnjak M. Development of a template for the fill and charging systems in the early concept phase with the CAD system CATIA V5 [Master's thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2021 [cited 2024 September 12] Available at: https://urn.nsk.hr/urn:nbn:hr:179:421434

M. Bošnjak, "Development of a template for the fill and charging systems in the early concept phase with the CAD system CATIA V5", Master's thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:179:421434

Metadata
TitleDevelopment of a template for the fill and charging systems in the early concept phase with the CAD system CATIA V5
Title (english)Razvoj predloška za sustave punjenja u ranoj fazi koncepta s CAD sustavom CATIA V5
AuthorMario Bošnjak
MentorBranimir Lela https://orcid.org/0000-0001-5197-0224 (mentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Mechanical Engineering Technology)
Split
Defense date and country2021-12-10, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
In this thesis, the development of a tank filling system is shown. The first part of the paper shows the rules that engineers must adhere to during the model construction phase. The second part shows how to automate the system and the tool that was created for the purpose of automation. A GUI has been created in which the user enters the main parameters related to the model geometry. The tool allows the user to create a basic model of the tank filling system, with just a few clicks, and gives him a standardized structure. In this way, there is a great saving of time, and thus money, in the realization of the project. Human errors are reduced to a minimum.
Abstract (english)
U ovom diplomskom radu prikazan je razvoj sustava za punjenje spremnika. U prvom dijelu rada prikazana su pravila kojih se inženjeri moraju pridržavati u fazi izrade modela. Drugi dio pokazuje kako automatizirati sustav i alat koji je stvoren u svrhu automatizacije. Izrađen je GUI u koji korisnik unosi glavne parametre vezane uz geometriju modela. Alat omogućuje korisniku izradu osnovnog modela sustava za punjenje spremnika, sa samo nekoliko klikova, te mu daje standardiziranu strukturu. Na taj način dolazi do velike uštede vremena, a time i novca u realizaciji projekta. Ljudske pogreške svedene su na minimum.
Keywords
Keywords (english)
Languageenglish
URN:NBNurn:nbn:hr:179:421434
Study programmeTitle: Mechanical Engineering; specializations in: Structures and Energy Technology, Computer Aided Design and Engineering, Production Mechanical Engineering
Course: Computer Aided Design and Engineering
Study programme type: university
Study level: graduate
Academic / professional title: Magistar/magistra inženjer/inženjerka strojarstva (Magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsEmbargoed access
Embargo expiration date: 2026-12-11
Terms of useLicence In copyright icon
Created on2022-12-05 09:15:06