prikaz prve stranice dokumenta Uvijanje štapova neokruglog presjeka
Access restricted to authenticated users
undergraduate thesis
Uvijanje štapova neokruglog presjeka
Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:179:686871
Delić, Karla
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of the Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture

Cite this document

Delić, K. (2022). Uvijanje štapova neokruglog presjeka (Undergraduate thesis). Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:686871

Delić, Karla. "Uvijanje štapova neokruglog presjeka." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:179:686871

Delić, Karla. "Uvijanje štapova neokruglog presjeka." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:179:686871

Delić, K. (2022). 'Uvijanje štapova neokruglog presjeka', Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 16 July 2024, https://urn.nsk.hr/urn:nbn:hr:179:686871

Delić K. Uvijanje štapova neokruglog presjeka [Undergraduate thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2022 [cited 2024 July 16] Available at: https://urn.nsk.hr/urn:nbn:hr:179:686871

K. Delić, "Uvijanje štapova neokruglog presjeka", Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:179:686871

Metadata
TitleUvijanje štapova neokruglog presjeka
AuthorKarla Delić
MentorMarko Vukasović (mentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Mechanical Engineering and Naval Architecture)
Split
Defense date and country2022-09-22, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U završnom radu analizirano je uvijanje štapova neokruglog poprečnog presjeka. Kroz cijelu analizu prikazana su potrebna ograničenja geometrije, opterećenja i pomaka, kao i pretpostavke o deformiranju na kojima se zasnivaju svi potrebni izvodi kako bi se došlo do gotovih izraza za posmična naprezanja i relativni kut uvijanja. U različitim jednostavnim primjerima za štapove tankstojenog poprečnog presjeka prikazano je kako se zadaci mogu rješavati preko dvije metode. Također je kroz konkretan primjer napravljena usporedba nosivosti i krutosti kod otvorenog i zatvorenog tankostjenog poprečnog presjeka.
Abstract (english)
In the final paper, the twisting of beams with a non-circular cross-section was analyzed. Through the entire analysis, the necessary constraints on geometry, loads and displacements, as well as assumptions about deformation, on which all the necessary derivations are based in order to arrive to ready-made expressions for shear stresses and relative twist angle. In simple various examples for beams of thin-walled cross-sections, it is shown how the problems can be solved using two methods. Also, through a concrete example, a comparison of load capacity and stiffness in open and closed thin-walled cross-sections was made.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:686871
Study programmeTitle: Mechanical Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: Stručni/Stručna prvostupnik/prvostupnica (baccalaureus/ baccalaurea) inženjer/inženjerka strojarstva (Stručni/Stručna prvostupnik/prvostupnica (baccalaureus/ baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Created on2023-03-27 10:01:58