prikaz prve stranice dokumenta Rekonstrukcija 3D geometrije objekta primjenom 3D skeniranja te izrade CAD i fizičkog modela
Access restricted to authenticated users
undergraduate thesis
Rekonstrukcija 3D geometrije objekta primjenom 3D skeniranja te izrade CAD i fizičkog modela
Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. urn:nbn:hr:179:904821
Domazet, Marija
University of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
Department of Mechanical Engineering and Naval Architecture

Institutional repository: Repository of the Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture

Cite this document

Domazet, M. (2022). Rekonstrukcija 3D geometrije objekta primjenom 3D skeniranja te izrade CAD i fizičkog modela (Undergraduate thesis). Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture. Retrieved from https://urn.nsk.hr/urn:nbn:hr:179:904821

Domazet, Marija. "Rekonstrukcija 3D geometrije objekta primjenom 3D skeniranja te izrade CAD i fizičkog modela." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:179:904821

Domazet, Marija. "Rekonstrukcija 3D geometrije objekta primjenom 3D skeniranja te izrade CAD i fizičkog modela." Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2022. https://urn.nsk.hr/urn:nbn:hr:179:904821

Domazet, M. (2022). 'Rekonstrukcija 3D geometrije objekta primjenom 3D skeniranja te izrade CAD i fizičkog modela', Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, accessed 27 December 2024, https://urn.nsk.hr/urn:nbn:hr:179:904821

Domazet M. Rekonstrukcija 3D geometrije objekta primjenom 3D skeniranja te izrade CAD i fizičkog modela [Undergraduate thesis]. Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture; 2022 [cited 2024 December 27] Available at: https://urn.nsk.hr/urn:nbn:hr:179:904821

M. Domazet, "Rekonstrukcija 3D geometrije objekta primjenom 3D skeniranja te izrade CAD i fizičkog modela", Undergraduate thesis, University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, Split, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:179:904821

Metadata
TitleRekonstrukcija 3D geometrije objekta primjenom 3D skeniranja te izrade CAD i fizičkog modela
Title (english)Reconstruction of the object's 3D geometry using 3D scanning and CAD and physical model creation
AuthorMarija Domazet
MentorDamir Vučina (mentor)
GranterUniversity of Split
Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture
(Department of Mechanical Engineering and Naval Architecture)
Split
Defense date and country2022-09-21, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Moderni svijet je sklon brzim promjenama koje se najbolje očituju u napretku tehnologije, stoga kao inženjeri moramo biti spremni konstantno učiti nova znanja te napredovati u područjima koja već poznajemo. 3D tehnologija skeniranja i printanja je tehnologijama koja pokazuje ogromni potencijal i područje njene primjene se širi iz dana u dan. U ovom radu dotakli smo se osnovne podjele i principa rada 3D skenera, obradi rezultata skeniranja te procesu 3D printanja skena. Koristili smo se softverom ATOS, Solidworks, Netfabb, Autodesk te Flash Print 5 kako bi uspješno kreirali 3D model koji smo u konačnici 3D isprintali. Drugim riječima, na ovaj način zaokružili smo cijeli proces obrade i reprodukcije 3D modela.
Abstract (english)
The modern world is prone to rapid changes that are best reflected in the advancement of technology, so as engineers we must be ready to constantly learn new knowledge and advance in the areas we already know. 3D scanning and printing technology is one of the technologies that shows enormous potential and the field of its application is expanding day by day. In this paper, we touched upon the basic division and working principles of 3D scanners, the processing of scanning results, and the process of 3D printing scans. We used ATOS, Solidworks, Netfabb, Autodesk and Flash Print 5 software to successfully create a 3D model that we ultimately 3D printed. In other words, in this way we completed the entire process of processing and reproduction of 3D models.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:179:904821
Study programmeTitle: Industrial Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka industrijskog inženjerstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka industrijskog inženjerstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to authenticated users
Terms of useLicence In copyright icon
Created on2023-03-28 08:20:13