prikaz prve stranice dokumenta Utjecaj vrste ispune na karakteristike 3D-tiskane tablete
No public access
master's thesis
Utjecaj vrste ispune na karakteristike 3D-tiskane tablete
Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology, 2020. urn:nbn:hr:149:910338
Šimić, Veronika
University of Zagreb
Faculty of Chemical Engineering and Technology

Institutional repository: Repository of Faculty of Chemical Engineering and Technology University of Zagreb

Cite this document

Šimić, V. (2020). Utjecaj vrste ispune na karakteristike 3D-tiskane tablete (Master's thesis). Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:149:910338

Šimić, Veronika. "Utjecaj vrste ispune na karakteristike 3D-tiskane tablete." Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, 2020. https://urn.nsk.hr/urn:nbn:hr:149:910338

Šimić, Veronika. "Utjecaj vrste ispune na karakteristike 3D-tiskane tablete." Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, 2020. https://urn.nsk.hr/urn:nbn:hr:149:910338

Šimić, V. (2020). 'Utjecaj vrste ispune na karakteristike 3D-tiskane tablete', Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, accessed 27 December 2024, https://urn.nsk.hr/urn:nbn:hr:149:910338

Šimić V. Utjecaj vrste ispune na karakteristike 3D-tiskane tablete [Master's thesis]. Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology; 2020 [cited 2024 December 27] Available at: https://urn.nsk.hr/urn:nbn:hr:149:910338

V. Šimić, "Utjecaj vrste ispune na karakteristike 3D-tiskane tablete", Master's thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:149:910338

Metadata
TitleUtjecaj vrste ispune na karakteristike 3D-tiskane tablete
Title (english)Influence of infill type on the properties of 3D-printed tablets
AuthorVeronika Šimić
MentorGordana Matijašić (mentor)
Committee memberGordana Matijašić (predsjednik povjerenstva)
Committee memberJuraj Šipušić (član povjerenstva)
Committee memberStanislav Kurajica (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Chemical Engineering and Technology
Zagreb
Defense date and country2020-09-30, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Chemical Engineering
Abstract
U ovom radu ispitan je utjecaj vrste ispune na karakteristike 3D-tiskane tablete. U tu svrhu pomoću 3D-printera tiskane su tablete s tri različite vrste ispune (trokut, linija, heksagon) i dvije različite gustoće ispune (60 % i 80 %). Korišteni filament pripravljen je ekstrudiranjem mješavine koja je sadržavala dronedaron-hidroklorid i filament poli(vinil-alkohola) i poli(etilen-glikol). Tiskane tablete analizirane su stereomikroskopom. Ispitivanje oslobađanja djelatne tvari provedeno je in vitro, prema USP 2 metodi. Dobiveni profili oslobađanja uspoređeni su i opisani kinetičkim modelom. U tu svrhu korišten je programski dodatak za Microsoft Excel, DDSolver. Svi profili oslobađanja mogu se opisati modelom procesa prvoga reda. Određene su i vrijednosti faktora razlike koje ukazuju na sličnost profila oslobađanja.
Abstract (english)
This paper examines the influence of infill type on the properties of 3D-printed tablets. In order to do that tablets with three different infill types (triangle, line, hexagon) and two different densities (60 % and 80 %) were 3D printed. The filament used was made by extruding the mixture containing dronedarone-hydrochloride, poly(vinyl alcohol) filament and poly(ethylene glycol). The printed tablets were analyzed under the stereo microscope. The analysis of the release of the active pharmaceutical ingredient was conducted in vitro, according to the USP 2 method. Dissolution profiles needed to be compared and described using the kinetic model. For that purpose an add-in program for Microsoft Excel called DDSolver was used. All the dissolution profiles were described using the first order system. Difference factors that show the similarity between different dissolution profiles were investigated.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:149:910338
Study programmeTitle: Chemical Engineering - Graduate study
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka kemijskog inženjerstva (magistar/magistra inženjer/inženjerka kemijskog inženjerstva)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2022-04-14 13:30:06