prikaz prve stranice dokumenta Izvedba planarnih senzora za bromide na površini srebrne elektrode otisnute tintnim pisačem
  Download
PDF 2.13 MB
undergraduate thesis
Izvedba planarnih senzora za bromide na površini srebrne elektrode otisnute tintnim pisačem
Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology, 2018. urn:nbn:hr:149:684443
Tominac, Mia
University of Zagreb
Faculty of Chemical Engineering and Technology

Institutional repository: Repository of Faculty of Chemical Engineering and Technology University of Zagreb

Cite this document

Tominac, M. (2018). Izvedba planarnih senzora za bromide na površini srebrne elektrode otisnute tintnim pisačem (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:149:684443

Tominac, Mia. "Izvedba planarnih senzora za bromide na površini srebrne elektrode otisnute tintnim pisačem." Undergraduate thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, 2018. https://urn.nsk.hr/urn:nbn:hr:149:684443

Tominac, Mia. "Izvedba planarnih senzora za bromide na površini srebrne elektrode otisnute tintnim pisačem." Undergraduate thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, 2018. https://urn.nsk.hr/urn:nbn:hr:149:684443

Tominac, M. (2018). 'Izvedba planarnih senzora za bromide na površini srebrne elektrode otisnute tintnim pisačem', Undergraduate thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, accessed 02 October 2024, https://urn.nsk.hr/urn:nbn:hr:149:684443

Tominac M. Izvedba planarnih senzora za bromide na površini srebrne elektrode otisnute tintnim pisačem [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology; 2018 [cited 2024 October 02] Available at: https://urn.nsk.hr/urn:nbn:hr:149:684443

M. Tominac, "Izvedba planarnih senzora za bromide na površini srebrne elektrode otisnute tintnim pisačem", Undergraduate thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:149:684443

Metadata
TitleIzvedba planarnih senzora za bromide na površini srebrne elektrode otisnute tintnim pisačem
Title (english)Preparation of solid state bromide sensor on the silver surface obtained by nano silver ink printing
AuthorMia Tominac
MentorStjepan Milardović (mentor)
Committee memberStjepan Milardović (predsjednik povjerenstva)
Committee memberLidija Furač (član povjerenstva)
Committee memberMarijana Kraljić Roković (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Chemical Engineering and Technology
Zagreb
Defense date and country2018-09-21, Croatia
Scientific / art field,
discipline and subdiscipline		NATURAL SCIENCES
Chemistry
Inorganic Chemistry
Abstract
Tema ovog rada je izvedba planarne Ag|AgBr elektrode na površini srebrne elektrode dobivene ispisom tintnim pisačem, a koja će služiti kao senzor za mjerenje bromida u vodenoj otopini. Čestice nanosrebra ink-jet printerom nanesene su na fleksibilnu polimernu podlogu. Tako pripremljena elektroda modificirana je kemijski, otopinom FeBr3, kao i elektrokemijski, cikličkom voltametrijom odnosno potenciostatski. Kao rezultat modifikacije nastao je sloj srebrovog bromida na površini elektrode. Potenciometrijskom metodom provedeno je ispitivanje dobivene elektrode u neprotočnim ćelijama u nizu standardnih otopina kalijeva bromida sa i bez podešene ionske jakosti. Ionska jakost podešena je otopinama Na2SO4, NaNO3 i NaAc. Također je provedena elektrokemijska modifikacija i ispitivanje Ag disk elektrode, a dobiveni rezultati uspoređeni su s rezultatima dobivenim mjerenjima pomoću nanosrebrom ispisane elektrode. Najbolje odzive pokazala je nanotintom ispisana elektroda dobivena modifikacijom sa željezovim(III) bromidom te potenciostatski modificirana disk elektroda. Općenito, bolja osjetljivost je dobivena koristeći printanu elektrodu. Ako promatramo samo elektrokemijsku vrstu modifikacije, možemo zaključiti da je potenciostatska metoda bolji odabir modificiranja metalne površine.
Abstract (english)
In this work, an all-solid-state Ag|AgBr electrode was successfully fabricated on the surface of a planar silver electrode imprinted with an ink-jet printer. In the printing process nanoscale silver particles were applied to a flexible polymeric substrate. The electrode thus prepared was modified chemically using FeBr3 solution, and electrochemically, by cyclic voltammetry and at fixed potential. As a result of the modification, a thin layer of silver bromide was formed on the surface of the electrode. In order to test the electrode, potentiometric measurements were performed in a series of standard potassium bromide solutions with and without the adjusted ionic strength. Adjusting the ionic strength was achieved using 50 mM Na2SO4, NaNO3 and NaCH3COO solutions. Electrochemical modification and examination of the Ag disc electrode were also performed. Finally, collected results were compared to the results of the printed electrode measurements. The best response was given by the printed electrode whose surface was modified using ferric bromide and disc electrode modified potentiostatically. Generally, better sensitivity (higher slopes) was obtained using a printed electrode. If we observe only the electrochemical type of modification, we can conclude that the potentiostatic method is a better choice for modifying the metal surface.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:149:684443
Study programmeTitle: Applied Chemistry - Undergraduate study; specializations in: Environmental chemistry and green technologies, Advanced materials and technologies, Applied organic chemistry
Course: Advanced materials and technologies
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) primijenjene kemije (sveučilišni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) primijenjene kemije)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-07-08 15:36:19