prikaz prve stranice dokumenta Ispitivanje utjecaja temperature na proces rasta titanijevih nanocjevčica metodom anodizacije
Access restricted to students and staff of home institution
undergraduate thesis
Ispitivanje utjecaja temperature na proces rasta titanijevih nanocjevčica metodom anodizacije
Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology, 2021. urn:nbn:hr:149:065787
Jajčević, Marko
University of Zagreb
Faculty of Chemical Engineering and Technology

Institutional repository: Repository of Faculty of Chemical Engineering and Technology University of Zagreb

Cite this document

Jajčević, M. (2021). Ispitivanje utjecaja temperature na proces rasta titanijevih nanocjevčica metodom anodizacije (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:149:065787

Jajčević, Marko. "Ispitivanje utjecaja temperature na proces rasta titanijevih nanocjevčica metodom anodizacije." Undergraduate thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, 2021. https://urn.nsk.hr/urn:nbn:hr:149:065787

Jajčević, Marko. "Ispitivanje utjecaja temperature na proces rasta titanijevih nanocjevčica metodom anodizacije." Undergraduate thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, 2021. https://urn.nsk.hr/urn:nbn:hr:149:065787

Jajčević, M. (2021). 'Ispitivanje utjecaja temperature na proces rasta titanijevih nanocjevčica metodom anodizacije', Undergraduate thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, accessed 20 December 2024, https://urn.nsk.hr/urn:nbn:hr:149:065787

Jajčević M. Ispitivanje utjecaja temperature na proces rasta titanijevih nanocjevčica metodom anodizacije [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology; 2021 [cited 2024 December 20] Available at: https://urn.nsk.hr/urn:nbn:hr:149:065787

M. Jajčević, "Ispitivanje utjecaja temperature na proces rasta titanijevih nanocjevčica metodom anodizacije", Undergraduate thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:149:065787

Metadata
TitleIspitivanje utjecaja temperature na proces rasta titanijevih nanocjevčica metodom anodizacije
Title (english)Investigation of the influence of the temperature on anodization growth of titanium oxide nanotubes
AuthorMarko Jajčević
MentorVilko Mandić (mentor)
Committee memberVilko Mandić (predsjednik povjerenstva)
Committee memberJuraj Šipušić (član povjerenstva)
Committee memberKrunoslav Žižek (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Chemical Engineering and Technology
Zagreb
Defense date and country2021-09-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Chemical Engineering
Abstract
Uzorci TiO2 nanocjevčica pripremljeni su metodom anodizacije. Cilj je bio ispitati utjecaj temperature na rast ovog nanostrukturiranog sustava. Korištena je titanijeva folija, te teflonska anodizacijska ćelija, a sam proces je proveden pri tri različite temperature. Proces je praćen kroz promjenu struje u vremenu pri konstantnoj vrijednosti napona, iz čega je bilo moguće izvesti zaključke o utjecaju trajanja jetkanja na rast TiO2 nanocjevčica. Kako bi se proučila morfologija i svojstva dobivenih uzoraka i njihova međusobna razlika koristile su se metode karakterizacije pretražna elektronska mikroskopija (SEM), mikroskopija atomskih sila (AFM) i difrakcija rendgenskih zraka (XRD). Karakterizacija SEM metodom omogućila nam je uvid u promjer i debljinu cjevčica te gustoću njihove raspodjele. AFM metoda omogućila nam je proučavanje ujednačenosti i hrapavosti same površine uzoraka. Rendgenska difrakcija je potvrdila da dobivene nanocjevčice nakon termičke obrade kristaliziraju u anatas. Dobiveni rezultati ukazuju na sličnosti i razlike između tri navedena smjera priprave uzorka. Uspješnost sinteze i obrade uzoraka potvrđena je kroz prisutnost poželjnih nanocjevčica, uz pojavu drugih nanostrukturnih oblika.
Abstract (english)
The TiO2 nanotube samples were prepared by the anodization method. The goal was to examine the effect of temperature on the growth in this nanoscaled system. Titanium foil and a teflon anodizing cell were used, and the process itself was carried out at three different temperatures. The process was monitored through the change of current over time at a constant voltage value, from which it was possible to draw conclusions about the influence of etching duration on growth of the TiO2 nanotubes. In order to study the morphology and properties of the obtained samples and their mutual difference, the methods of characterization: scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD) were used. SEM gave us an insight into the diameter and thickness of the tubes and the density of their distribution. AFM allowed us to study the uniformity and roughness of the sample surface itself. X-ray diffraction confirmed that obtained nanotubes after heat treatment were crystal structure of anatase. Obtained results point out to the differences and similarities between the three samples. The successfulness of the course of the optimisation of the synthesis and processing of the samples was confirmed by the presence of desirable nanotubes along with the appearance of other nanostructured forms.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:149:065787
ProjectNumber: PZS-2019-02-1555
Title: Fotonaponska-geopolimerna fasada: uloga vode-kisika u naprednom sklapanju filmova kompozitnih materijala
Title: Photovoltaic-geopolymer facade: the water-oxygen role in the advanced assembly of layered composite materials
Acronym: PV-WALL
Leader: Vilko Mandić
Jurisdiction: Croatia
Funder: HRZZ
Funding stream: PZS
ProjectNumber: UIP-2019-04-2367
Title: Fenomeni na površini tijekom priprave naprednih nanokompozita infiltracijom i funkcionalizacijom poroznih materijala
Title: Surface limitations in preparing and infiltration of hard porous nanomaterial by soft or liquid precursors for performance enhancing
Acronym: SLIPPERYSLOPE
Leader: Vilko Mandić
Jurisdiction: Croatia
Funder: HRZZ
Funding stream: UIP
Study programmeTitle: Environmental Engineering - Undergraduate study
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka ekoinženjerstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka ekoinženjerstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2023-04-03 09:29:13