prikaz prve stranice dokumenta Stabilnost fluidnog toka u kanalima milireaktora
Access restricted to students and staff of home institution
undergraduate thesis
Stabilnost fluidnog toka u kanalima milireaktora
Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology, 2019. urn:nbn:hr:149:018461
Marčec, Dorotea
University of Zagreb
Faculty of Chemical Engineering and Technology

Institutional repository: Repository of Faculty of Chemical Engineering and Technology University of Zagreb

Cite this document

Marčec, D. (2019). Stabilnost fluidnog toka u kanalima milireaktora (Undergraduate thesis). Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:149:018461

Marčec, Dorotea. "Stabilnost fluidnog toka u kanalima milireaktora." Undergraduate thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, 2019. https://urn.nsk.hr/urn:nbn:hr:149:018461

Marčec, Dorotea. "Stabilnost fluidnog toka u kanalima milireaktora." Undergraduate thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, 2019. https://urn.nsk.hr/urn:nbn:hr:149:018461

Marčec, D. (2019). 'Stabilnost fluidnog toka u kanalima milireaktora', Undergraduate thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, accessed 09 June 2024, https://urn.nsk.hr/urn:nbn:hr:149:018461

Marčec D. Stabilnost fluidnog toka u kanalima milireaktora [Undergraduate thesis]. Zagreb: University of Zagreb, Faculty of Chemical Engineering and Technology; 2019 [cited 2024 June 09] Available at: https://urn.nsk.hr/urn:nbn:hr:149:018461

D. Marčec, "Stabilnost fluidnog toka u kanalima milireaktora", Undergraduate thesis, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:149:018461

Metadata
TitleStabilnost fluidnog toka u kanalima milireaktora
Title (english)Stability of fluid flow in chanels of a millireactor
AuthorDorotea Marčec
MentorVladimir Dananić (mentor)
Committee memberVladimir Dananić (predsjednik povjerenstva)
Committee memberVesna Volovšek (član povjerenstva)
Committee memberEmi Govorčin Bajsić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Chemical Engineering and Technology
Zagreb
Defense date and country2019-09-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Chemical Engineering
Abstract
Cilj ovoga rada je ispitati utjecaj različitih oblika ulazne sekcije, takozvanih milimiješala, na razvoj profila strujanja u milireaktorima u višefaznom, nemješljivom sustavu ulje-voda. U tu svrhu dizajnirana su tri reaktora okruglog poprečnog presjeka kanala, φ = 2 mm s duljinom kanala l = 640 mm i milimiješala T-oblika, J-oblika i Y-oblika. Modeli milireaktora nacrtani su u računalnom programu za 3D modeliranje ANSYS i izrađeni tehnologijom aditivne proizvodnje na uređaju Ultimaker to Go. U sva tri milireaktora proveli su se eksperimenti pri istim volumnim protocima, odnosno, jednakim vremenima zadržavanja, τ prilikom čega su praćene i opisane pojave različitih režima strujanja unutar cijevi milireaktora. Provedeni eksperimenati ukazuju da oblik ulazne sekcije (milimiješalo) uvelike utječe na razvoj profila strujanja u milireaktorima pri čemu se najčešće pojavljuje segmentirano strujanje.
Abstract (english)
The aim of this thesis is to test influence of different entry sections, so called mili mixers, on the development of fluid flow in multiphased, non-mixing system oil-water. For this purpose three reactors with diameter of φ = 2 mm and channel lenght of l=640 mm have been designed with three different milimixers: T-shape, J-shape and Y-shape. Models of milireactors are made in computer software for 3D modeling ANSYS and made with additive manufacturing technology on Ultimaker to go. Experiments were made in all three milireactors at the same volumetric flow rate which means in the same retention time, τ, and at during which notes and description of the flow was made. Experiments have shown that the shape of entry section (milimixer) greatly influences the development of fluid flow in milireactors where the most common type of flow is segmented flow.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:149:018461
Study programmeTitle: Materials Science and Engineering - Undergraduate study
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka kemijskog inženjerstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka kemijskog inženjerstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2023-05-25 09:49:44